Hey can anyone tell me where to hook up the vacuum modulator line. Does it go to the manifold or the carby. The trams is a th350 on to a mild 308. Cheers.
Th350 vaccum modulator line
Started by
_wadsinbox_
, Dec 06 2012 10:09 AM
2 replies to this topic
#1 _wadsinbox_
Posted 06 December 2012 - 10:09 AM
#2 _434LX_
Posted 06 December 2012 - 11:22 AM
It uses manifold vacuum, so either the manifold or some carby fittings is fine.
Check that the barb on the carby is one that goes directly into the manifold through the carby's base plate.
Check that the barb on the carby is one that goes directly into the manifold through the carby's base plate.
#3 _wadsinbox_
Posted 06 December 2012 - 12:34 PM
Will do. Cheers
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users