Rear Window Rust
#1 _[Azer]_
Posted 20 June 2006 - 07:09 PM
cheers
-Azer
#2 _[Azer]_
Posted 20 June 2006 - 07:34 PM
#3 _munro_
Posted 20 June 2006 - 11:51 PM
my ph:0417998743
cheers tom
#4 _[Azer]_
Posted 21 June 2006 - 02:47 AM
#5 _munro_
Posted 21 June 2006 - 10:59 AM
if your unsure of getting the work done give me a call
i'm currantly doing my own torrie (about 1/2 done) and you can inspect my workmanship.
i've just replaced sill panel, beaver panel and rebuilt a pillar.
my ph: is in pervious reply
tom
#6 _kaz from adelaide_
Posted 21 June 2006 - 11:26 AM
This is what we found under Rubys seal
http://memimage.card.../586976_206.jpg
http://memimage.card.../586976_211.jpg
http://memimage.card.../586976_212.jpg
#7 _[Azer]_
Posted 26 June 2006 - 04:46 PM
apparently it was bogged up and resprayed, poor torry ;(
#8 _kaz from adelaide_
Posted 26 June 2006 - 10:33 PM
#9 _munro_
Posted 27 June 2006 - 06:07 PM
it'll be rust free tom
#10
Posted 27 June 2006 - 06:42 PM
#11 _munro_
Posted 28 June 2006 - 12:05 AM
i'm not fully setup for the spraypainting side of things but can make do with what i've got
i've been doing mechanical work for the last 8years or so.
i've put an offer on a buisiness thats 4 sale but these things take time so i've been chasing up odd jobs to make ends meet.
so my services are currantly avaliable
(no full resto's tho as i don't have that much time)
ph:0417998743
i'm sure azza will post some pics of my work tom
#12 _[Azer]_
Posted 29 June 2006 - 08:48 PM
"pic of hole taken at 9am
pic of repair taken at 4.30pm
enjoy tom"
lookin good!
Edited by [Azer], 29 June 2006 - 08:49 PM.
#13 _kaz from adelaide_
Posted 30 June 2006 - 11:39 AM
#14 _munro_
Posted 30 June 2006 - 12:31 PM
only problem is all my tools are here
tom
#15
Posted 30 June 2006 - 06:27 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users