Forum Fixture
Posted 01 June 2014 - 09:37 PM
Hi all
It has been a while since I have rebuilt a master cylinder.
Just trying to disassemble my PBR master cylinder on my LC. I have removed the C-clip and the retainer bolt underneath, but while the cylinder moves in the master cylinder, I cannot remove it, any hints.
cheers
Glenn
Lotsa Posts!
Posted 01 June 2014 - 09:42 PM
Forum Fixture
Posted 01 June 2014 - 09:43 PM
I couldnt see one, but I will have another look
This is what I see inside the reservoirs
There doesnt appear to be a bold in the reservoir
cheers
Glenn
Edited by r2160, 01 June 2014 - 09:49 PM.
_Bomber Watson_
Posted 01 June 2014 - 10:04 PM
Bolt underneath it.
Undo it, then compressed air in the outlet ports, gently, should all plop out.
Cheers.
Forum Fixture
Posted 01 June 2014 - 10:13 PM
Cool, thanks Bomber, I have removed the bolt underneath but just havent been able to pop it out.
I will try air
cheers
Glenn
Forum Fixture
Posted 01 June 2014 - 10:23 PM
Cool, I got a piston assembly out. Am I correct in assuming there are two?
cheers
Glenn
Do I feel lucky? Well, do ya, punk?
Posted 01 June 2014 - 10:31 PM
Yes theres 2
The bottom one is held in with the bolt underneath
When refitting you need to push the piston down against the spring before screwing it back in
Failure to do so will damage the bottom piston
0 members, 1 guests, 0 anonymous users
