LH-LX Tail-light buckets
#51
Posted 10 August 2017 - 08:30 PM
#52 _uchsv_
Posted 25 October 2017 - 07:33 AM
#53 _uchsv_
Posted 25 October 2017 - 03:36 PM
$200 per side. hatch or sedan (they are different). $400 a set (pair).
I'm in Port Hedland at the moment.
Pm sent mate
Edited by uchsv, 25 October 2017 - 03:37 PM.
#54
Posted 26 February 2023 - 10:29 PM
Hi Torana lovers,
Haven't posted for a while but just thought I would everyone know that I am still making LH-LX taillight buckets as well as a range of other parts. I haven't supplied Resto Country with buckets for a while and certainly will not be supplying them now they are owned by Rares. Have made quite a few patch sections for the taillights for UC conversions, and plenty of A-pillar end caps. Also make door frame bottoms, front door corners, hatchback C-pillar sections, lower plenum sections, rear chassis rail sections, and at the moment I am just finishing off a complete rear panel and beaver panel. Also have made plenty of custom sections just from photos like windscreen frame pieces, floor pieces, small sections of wheel arch and others.
Recently purchased the world's worst rusty LC coupe so it looks like I will be getting to know these bodies pretty well in the near future, as a lot of sheet metal will need to be replaced. I have heard that nobody sells coupe door skins for these so maybe that is one panel I will have to have a go at as I will need them for my car.
If anyone is looking for any of these panels/parts or if they have a suggestion for a panel to make, please let me know and I will see if I can help.
Thanks, Grant 0478 732274
#55
Posted 27 February 2023 - 12:00 AM
Lower plenum , are the A pillar end caps the bit at the top or bottom ?
Need chassis rail sections too
#56
Posted 27 February 2023 - 07:31 AM
Hi Torana lovers,
Recently purchased the world's worst rusty LC coupe so it looks like I will be getting to know these bodies pretty well in the near future, as a lot of sheet metal will need to be replaced. I have heard that nobody sells coupe door skins for these so maybe that is one panel I will have to have a go at as I will need them for my car.
If anyone is looking for any of these panels/parts or if they have a suggestion for a panel to make, please let me know and I will see if I can help.
Thanks, Grant 0478 732274
Hello Grant, Waddingtons make door skins for the LC LJ 2dr & 4dr.
https://m.facebook.c...78119945630915/
#57
Posted 27 February 2023 - 09:41 AM
Nice to see you back in here Grant. Will I be seeing you at Phillip Island in a couple of weeks? It would be great to catch up mate.
#58
Posted 28 February 2023 - 06:17 AM
Hi Dave, that picture of the LJ door skin on Waddington's page was dated 2014. I heard on the grapevine that they haven't done panels for a few years.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users