hi guy's what's the best brand uni's tto get i have a lj wit 6cyl yokes
do you guys have any recommended brand? or are they all much of a muchness?
uni 's?
Started by
_@milco@_
, Dec 08 2005 06:33 PM
10 replies to this topic
#2
_draglc_
_draglc_
-
- Guests
Posted 08 December 2005 - 10:03 PM
the ones i got are from repco, but theyre hardy spicer brand, the old guy there reckoned they are the best. cost me $60 for one so theyd wanna be!
#3
_rorym_
_rorym_
-
- Guests
Posted 08 December 2005 - 11:31 PM
Buy the ones that have the grease nipple in the corner/body of the T, not the ones that have the nipple on the end of the uni, u cant go wrong.
R
R
#4
warrenm
View Garage
-
- Members
-
- 2,123 posts
Forum Fixture
- Location:Central West NSW
- Car:1972 LJ Torana
- Joined: 08-November 05
View Garage
Posted 09 December 2005 - 06:05 AM
REPCO (Rip Every Poor C#@t Off) You should be able to get a uni joint from a bearing service for $35-$40
#5
_Yella SLuR_
_Yella SLuR_
-
- Guests
Posted 11 December 2005 - 04:03 PM
Was advised that Hardy Spicer are the best. That's what's in Ol' Yella.
#7
_Bomber Watson_
_Bomber Watson_
-
- Guests
Posted 11 December 2005 - 09:31 PM
where can we get hardie spicer ones from yella fella?
#8
_Yella SLuR_
_Yella SLuR_
-
- Guests
Posted 12 December 2005 - 10:34 AM
Just about anywhere. As suggested above, Repco sell them. Think I bought mine from the Diff Doctor (i.e. a diff or transmission place).
Pat.
Pat.
#10
__azza_
__azza_
-
- Guests
Posted 22 December 2005 - 06:44 PM
i bought my uni from auto one for twenty bucks.
#11
_82911_
_82911_
-
- Guests
Posted 24 December 2005 - 02:50 PM
Rory,
almost right...
Should be the other way round!
You want the uni with either no grease nipple at all, or the one with the nipple in the end of the joint.
The uni's with the nipple in the thru trunion are hollow to allow the grease to reach out to the ends, that is why they break!
For what it is worth I don't have any uni joint issues either and mine are 6 cyl ones!
but I do life them at 50 hours and then replace them.
Cheers Greg..
almost right...
Should be the other way round!
You want the uni with either no grease nipple at all, or the one with the nipple in the end of the joint.
The uni's with the nipple in the thru trunion are hollow to allow the grease to reach out to the ends, that is why they break!
For what it is worth I don't have any uni joint issues either and mine are 6 cyl ones!
but I do life them at 50 hours and then replace them.
Cheers Greg..
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
