front spoiler?
#1 _oikurtman_
Posted 09 August 2006 - 01:01 PM
has anyone got one or know where i can get one?
cheers.
#2 _Yella SLuR_
Posted 09 August 2006 - 01:12 PM
You need to buy a new one. I'd buy the flare one off you, but already have one off the last forumer with this problem.
#3 _Flamenco_
Posted 09 August 2006 - 05:00 PM
#4 _oikurtman_
Posted 09 August 2006 - 07:46 PM
cheers.
#5
Posted 09 August 2006 - 09:13 PM
Also, decide which style (SS or SLR/L34/A9X) and which material (Fibreglass or Plastic) you would like. If you don't know what a certain type looks like then PM me and i'll find you a good photo.
Put a thread in the "wanted" section with your location, and people can either recommend which spoilers are good value on eBay and point out which aren't as good quality. They can also sell you their own ones they have lying around the house, or point you in the direction of a recommenable fibreglassing company in your town or city.
Good luck
#6 _Yella SLuR_
Posted 10 August 2006 - 11:47 AM
Was aware of two and one piece spoilers, but in terms of the return, only one length in the returns, which gets trimmed for flares. Steer clear of one piece spoilers, very poor fit.
#7 _oikurtman_
Posted 10 August 2006 - 06:31 PM
Cheers
#8 _caseyo69_
Posted 10 August 2006 - 08:30 PM
#9 _oikurtman_
Posted 14 August 2006 - 10:53 AM
cheers.
#10 _Yella SLuR_
Posted 14 August 2006 - 12:24 PM
#11 _oikurtman_
Posted 14 August 2006 - 06:22 PM
cheers.
#12 _Yella SLuR_
Posted 14 August 2006 - 07:07 PM
Constantly check for alignment and fit.
#13 _oikurtman_
Posted 14 August 2006 - 11:08 PM
so those two bolts are the ones next to the blinkers?
once marked and drilled, do you pull those bolts out and use them to mount the spoiler?
you said to fit self-tappers to the others. what 'are' the others? i'm guessing the ends of the spoiler and into the quarter panels somewhere?
cheers.
Edited by oikurtman, 14 August 2006 - 11:14 PM.
#14 _oikurtman_
Posted 21 August 2006 - 01:34 PM
now fitted to the LH, the spoiler sits down on the boot lid fine, but sticks out at the back, enough to fit my fingers between the inside of the spoiler and the back of the bootlid.
Is it supposed to be like that? or is it supposed to sit flush?
Cheers.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users