Hi all, Just wondering if anyone could give me an idea of how to get about 5 coats of paint of light surrounds without scratching or corroding them. Was considering paint stripper and scourer but worried this will scratch them.
Cheers SUPALJ
Paint removal off light surrounds?
Started by
_SUPALJ_
, Aug 11 2006 01:19 PM
7 replies to this topic
#1 _SUPALJ_
Posted 11 August 2006 - 01:19 PM
#2 _dave720gtr_
Posted 11 August 2006 - 01:34 PM
soak them in thinners over night this will soften the paint
then blast the paint of with hi press water blaster
then lighty polish them with them pink soap steel wool pads to remove any stubborn paint
be careful not to rub through the anodising
cheers
then blast the paint of with hi press water blaster
then lighty polish them with them pink soap steel wool pads to remove any stubborn paint
be careful not to rub through the anodising
cheers
Edited by dave720gtr, 11 August 2006 - 01:38 PM.
#3 _Bomber Watson_
Posted 11 August 2006 - 06:19 PM
or use paint stripper.
#4
Posted 11 August 2006 - 10:04 PM
^ use paint stripper and high pressuse water, and they will shine
#5 _pallbag_
Posted 11 August 2006 - 10:38 PM
Is this the same as Lh/LX ?
#6 _dave720gtr_
Posted 12 August 2006 - 12:19 AM
yer same as lh lx
#7 _EvilGTR_
Posted 13 August 2006 - 06:34 PM
Paint stripper.
#8 _rorym_
Posted 15 August 2006 - 06:14 PM
Stripper worked for me today..
R
R
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users