will one of you guys do me a favor, as i doont have access to a head off a block ATM, get a head (must be large valve pre efi or VN type) and measure across the inlet and exhaust valve centreline (or the widest piont of the chamber). the distance i need is from the outer edges of the combestion chamber, especially if relieved to flow, and also the measurement of the valves themselves again from left outer to right outer across the centerline.
valve clearence measurements needed
Started by
TerrA LX
, Aug 13 2006 09:27 PM
3 replies to this topic
#1
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 13 August 2006 - 09:27 PM
#2
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 14 August 2006 - 03:49 AM
304/308/5L heads if you were wondering.
i'll take what you can give me ATM. even stock red head
i'll take what you can give me ATM. even stock red head
#3
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 17 August 2006 - 02:55 PM
nobody got a set of 308 heads sitting around eh?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
