Pulled eng/auto out of wagon,eng had 11wt numbers so I thought it was trimatic until I checked bolt pattern was th like my other engine with th700.
Problem is that the m20/trimatic yoke is nearly half the size of the output shaft which makes me think it's a th400,also has a plug n/s rear of auto pointing outwards which I was told is th400 when the smaller box has plug pointing upwards.
How do I tell a th350 from a th400?
Can you tell by the output shaft& slip yoke?
Th400 or Th350
Started by
gtrboyy
, Aug 29 2006 03:38 PM
2 replies to this topic
#1
gtrboyy
-
- Members
-
- 3,141 posts
Lotsa Posts!
- Location:SYDNEY,NSW
- Joined: 07-November 05
Posted 29 August 2006 - 03:38 PM
#2
_Loki_
_Loki_
-
- Guests
Posted 29 August 2006 - 03:54 PM
M20 --> TH350 are the same yoke Diameters (at least mine was).
The Turbo boxes come in different lengths AFAIK, but I don't think these affect the input diameter.
The Turbo boxes come in different lengths AFAIK, but I don't think these affect the input diameter.
#3
_fatA9X_
_fatA9X_
-
- Guests
Posted 29 August 2006 - 06:38 PM
turbo 400 and 350 have different shape sumps too i think the 350 is square with one corner cut off (if thats how to explain it) and the 400 is square with a bit that juts out the side abit and from memory i think the rear housing on the400 is fat and short and the350 is a little longer and narrower. also the 400 is heeeeeps heavier. i have a 400 in the shed ill have a look. cheers wayne
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
