9 replies to this topic

[rotabox]

Hi All can anyone identify this banjo LSD center is it for a 2.78 gears or 3.55 gears

Attached Files

•  Banjo LSD.jpg   108.12K   4 downloads
•  Banjo LSD centre.jpg   140.28K   2 downloads

[claysummers]

Banjo LSD hub suits all gearsets I believe. It is the carrier that varys between 3.36 and 3.08.

Sent from my SM-G781B using Tapatalk

[limo]

There's also difference in the hub, offset 60 th or something. 308 and 278 same hub , 336, 355 and 389 same hub

[yel327]

As above . 2.78/3.08 is one unit and 3.36/3.55/3.90 the other. From HK through to VH. Earlier for the old 6cyl ratios (3.36 up).

[kudu]

Hi All can anyone identify this banjo LSD center is it for a 2.78 gears or 3.55 gears

 

What ratio were you wanting one for? Or what ratio are you wanting to run?

[Bruiser]

Got one in the shed in very convenient bits
Doesn’t look like yours, though
 397BE84E-BFCC-4A7B-9F62-006D3691445D.jpeg   201.79K   3 downloads
 ADEBF0CC-DB7C-492C-9AE2-49464DFA49DE.jpeg   220.04K   2 downloads
 7A014F65-2B42-4BAF-9458-0B522B5D0C8D.jpeg   188.54K   1 downloads

The gears are 2.78s. I think I’ve read 2.78 and 3.08 suit one type, and 3.36 and up go on the other.
Not a definitive answer, but it may help a bit.

[I'm a Red Motor fiend]

I remember a thread on this, have a search.
I think it was Heath that posted a pic of the two different hubs side by side with measurements. It helped me to I.D some I had.

[rotabox]

Thanks all Bruiser can you please confirm the last diget 22288?

[Bruiser]

It’s definitely an 8. It seems difference is in the half with the bolt flange for the crow wheel though
Here’s that thread

https://www.gmh-tora...fferent-ratios/

Once the boys have finished debating what to call the thing,
you can find the picture Adam is referring to on page 2
Mine measures up the same as the left one in Heath’s pic

[yel327]

The 222888 is the Patent number for an LSD. Not a part number.