LJ window sliders won’t stay on reg
#1
Posted 14 January 2024 - 04:11 PM
Car has been recently freshened with new sliders.
Any tips?
I am tempted to weld the suckers in place….
IMG_2277.jpeg 69.98K 5 downloads
IMG_2278.jpeg 111.34K 2 downloads
IMG_2279.jpeg 121.5K 1 downloads
#2
Posted 14 January 2024 - 04:35 PM
Grab your MIG and zap them. The original pins that held the rollers were peened. These also need to be peened or tack welded to hold them in place.
Remove the plastic slider from the pin of course before you weld.
Edited by S pack, 14 January 2024 - 04:40 PM.
#3
Posted 14 January 2024 - 04:36 PM
Yep I would tack them Rexy
#4
Posted 14 January 2024 - 07:38 PM
Excellent.
I shall follow your advice.
#5
Posted 15 January 2024 - 07:57 AM
Hi Rexy. As above. I tried to peen mine without success so put a tack on them. Cheers Ron
Edited by Cook, 15 January 2024 - 07:58 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users