Hi folks.
Just gauging interest from our kiwi viewers.
I have a few sets of labels/stencils/transfers/stamps available. I’ve painstakingly replicated the exact type face and weight from original labels, even down to the handmade (and random) serrations on some of the labels.
Available are:
Electrical label set for a July – mid December 1972 XU-1:
1 x Body harness label
1 x Instrument harness label
1 x Rear harness label
1 x Hi tone horn label
1 x Lo tone horn label
1 x Starter motor label (for a 1.3hp starter)
1 x Instrument panel label (GTR)
1 x Wiper motor label
1 x Lucas Alternator label (3” pulley)
1 x Heater fan label
1 x Fuel Sender label
[attachment=109526:20250426_165515.jpg]
Some of these labels may possibly be okay for other models, but you will need to do your own research to see if they match your car.
Suspension+ label set – 1972-73 82911:
2 x Front springs label
2 x Rear springs label
2 x Front shocks label
2 x Rear shocks label
1 x Radiator label (yeh I know everyone makes this label)
[attachment=109527:20250304_193329.jpg]
LJ (and a couple of LC) lower dash panel dry transfer labels are available. These are essentially rub on labels that look the same as the screen printed originals. They are NOT stickers or water slide decals. I’ve not seen any others making these with the exact same type face. This is for those who are after an original looking panel as possible. Pics below - lower black panel has the tranfers applied. The top is an original panel.
[attachment=109530:DSC_0013 (2).JPG][attachment=109531:DSC_0014 (2).JPG][attachment=109532:20250304_193423.jpg]
Drive shaft date label stencils are available. Custom made for your date requirements.
[attachment=109528:DSC00408.jpg][attachment=109529:20250222_125553.jpg]
Diff housing stencils are available. Choose from 3.36 LSD course, 3.08 LSD course, and 3.08 non-LSD course.
[attachment=109533:20250226_142506.jpg][attachment=109534:20250223_152447.jpg]
Various stamps:
Gearbox XU
Heater custom date. 2 to choose from.
VDO custom date
Steering column custom date
[attachment=109535:20250430_190035.jpg]
All stamps come with self-adhesive backing to mount a small wooden block. However, if need I can supply some 3d printed mounting blocks. Just trying to keep the shipping to a minimum😊
Please note - Custom stamps and stencils will need 1 week lead time.
If anyone is interested in the lower dash transfers, I’ll throw in an oil breather cap transfer. The weight on the text is wrong so I can't offer these for sale. The correct ones will be available soon in both black on silver and white on black. These will give an original look and are miles better than the stickers.
[attachment=109536:20250425_201053.jpg]
In the future I’ll look at a full transfers set for LC heater, and maybe if there is interest, transfers for the fuse panel.
Let me know if there is any other stuff you may like me to add?
Anything you like just message me. Can post NZ wide at cost.
View Garage
