4 replies to this topic

[Muzza]

Hi I have put a deposit onto a set of Front seats for my Torana LH, I’ve just realised they are Hatchback seats will they still bolts up into a sedan 

I understand i have to make new inner mounts as they are replacing a bench , I also understand the rego requirement

Thanks 

[Statler]

Yes . 

[Muzza]

Yes . 

Thank you

[Shiney005]

What month is the car Muzza? Early ones have eight holes in the floor for each seating position and later ones have four. Either way, any LH/LX bucket can use the same holes as the bench. There shouldn't be any modification needed.

 

 4 holes. Len. AXISTER. 4-75 LH.JPG   337.45K   2 downloads

Edited by Shiney005, 01 August 2025 - 10:16 AM.

[Muzza]

What month is the car Muzza? Early ones have eight holes in the floor for each seating position and later ones have four. Either way, any LH/LX bucket can use the same holes as the bench. There shouldn't be any modification needed.

 

4 holes. Len. AXISTER. 4-75 LH.JPG

Thanks, it’s a 4/74 S model, that has a bench seat, 

I have now picked up the seats, I see the passenger seat has the quick release, but not the drivers side, 

later in the year I will do the work and if needed make the inner mounting plates if needed, including if needed the blind inner front mount