Cheers Col!
Yeah there were a lot of tyre marks in the mud, at least I know my limits now haha
Posted 10 October 2016 - 07:43 AM
Cheers Col!
Yeah there were a lot of tyre marks in the mud, at least I know my limits now haha
Posted 04 January 2018 - 10:58 AM
Hey guys,
I want to set my car up without a brake booster. Anyone here that can let me know what I need to do for setup?
Presume I need to remove booster and lines that run to the proportioning valve.
Make a bracket to fit to the booster mount.
Purchase two master cylinders (size?) and balance bar (type?)
Plumb lines to new master cylinders.
If anyone has done this before and can explain in a bit more detail what is required it would be appreciated.
Thanks
Dave
Posted 04 January 2018 - 12:10 PM
Posted 04 January 2018 - 01:01 PM
Posted 08 January 2018 - 01:08 PM
Great thanks for the info Chris.
I have seen a few balance bars on VPW and ebay. will just do a bit of research into which ones are decent. Pretty big variation in price.
Posted 16 August 2018 - 12:43 PM
Two question.
Is there a reason guys don't run the Wilwood with no booster master cylinder setup in group nc cars? cant see anything in the rules against it.
I also cant see any restrictions with the exhaust setup, eg decibel levels or muffler requirements? can only see that the side pipe needs to be mounted so that it sits behind the front doors by "X" millimieters.
So just a straight pipe out the side is fine?
Posted 16 August 2018 - 04:14 PM
Edited by RallyRed, 16 August 2018 - 04:23 PM.
Posted 16 August 2018 - 05:48 PM
That lump looks like a Hot Dog has been installed..
Posted 16 August 2018 - 06:25 PM
Hi...I think CAMS General Requirements for Automobiles, section B, clause whatever says...
be configured such that the sound emitted when measured 30m from the track edge does not exceed
95dB(A) unless event regulations set a lower limit.
Posted 16 August 2018 - 07:56 PM
That lump looks like a Hot Dog has been installed..
Posted 17 August 2018 - 10:49 AM
Great thanks for the info Col.
Appreciate it.
0 members, 0 guests, 0 anonymous users