The LC 2 door... Quick lick and Flick
#76
Posted 19 August 2016 - 07:04 PM
#77 _Caustic_
Posted 19 August 2016 - 08:08 PM
#78 _2ELCS_
Posted 19 August 2016 - 08:42 PM
Well done looks great i enjoyed the read.
now go and enjoy it
#79
Posted 19 August 2016 - 09:07 PM
Look forward to seeing you on a cruise sometime soon.
Forum run shouldn't be too far away hey Gene?
Edited by Potta, 19 August 2016 - 09:08 PM.
#80
Posted 19 August 2016 - 09:22 PM
#81 _Caustic_
Posted 20 August 2016 - 12:47 AM
#82 _Caustic_
Posted 20 August 2016 - 01:06 AM
Edited by Caustic, 20 August 2016 - 01:08 AM.
#83
Posted 20 August 2016 - 07:59 PM
A nice job on them linkages John!!! a cruise would be great!! hope it happens when im home..... oh the joys of fifo.....
#84
Posted 20 August 2016 - 09:27 PM
Great job john, keep the posts coming. Earlier in your forum you mentioned you were tossing up to keep or sell car. For what its worth, if you don't need the cash I would keep it as there are countless members on the forum who comment "I wish I didn't sell my torry .....years ago!" Good two doors are getting harder and harder to find and you have most likely noticed that prices are slowly creeping up. I was at an old holden wreckers on Friday to pick up a set of lj horns and he had a two door project at the back of the workshop. You should have seen the rust on this thing, I'm amazed it hadn't actually collapsed and I don't think there was a single panel that didn't have tin worm including the roof. His comment was "normally it would go to scrap metal yard, but because it only has two doors, I/m gonna fix her up". Food for thought!.
#85 _Caustic_
Posted 21 August 2016 - 12:20 AM
Yep know all about that fifo lifestyle Ribz.Not these days thou mate.Your right on the money triples,many people regret selling certain cars in their life.
I had a HG gts 308 4spd monaro,didnt really rate that car Dinosaur.
Then had my VJ 265 4 spd charger definetly more exciting, awesome actually,That thing was permentally sideways.
Then I bought my VK SS, best car ive ever owned .Best of both worlds,performance and manners..still sad about getting rid of it for a VN SS, idiot...
Now Ive got my LC and V8 Lx Hatch.Ive gone off my hatch for now ( Ive been working on the LX behind the scenes).To develop the LC a bit more.
All 6cyl LC LJ owners know how rewarding and fun these cars are to build. Its not going anywhere just yet..Keep working on those cars team.
Edited by Caustic, 21 August 2016 - 12:23 AM.
#86 _Caustic_
Posted 01 September 2016 - 12:24 AM
Any way, all this work took place at my mates house, It was a case of removing the tailshaft and gearbox first whilst on the hoist,then removing the engine separately,less chance of scratching the paint.
We worked as a team, as I prepped the tail shaft converting the yoke back to toyota, my mate was stripping the engine.As I started reassembling it, old mate was cleaning the parts.
I end fitting a Wade 3/4 race cam,and somes speed pro anti pump up lifters and also fitted a alloy timing gear.Couldnt believe there was still a fibre gear fitted to that camshaft.
I apologize theres not many photos as we were just getting stuck into it.Ended up being a 9 1/2 hour marathon between beers and sandwichs ,but got it done with no leaks or scratches.Awesome also, that my old mate has all the gear and no idea..haha, sorry cob.
True friend for the past 26 years.
After breaking the cam in, neighbours must of loved that in the afternoon.We gave the car a shake down, best way to describe it.Reminds me of a 2 stroke KX80 when it hits its power band. The car pulls from about 2500 to about 6000 its all smiles.Feels like I need to get the more fuel into the engine, but thats another project,cheers all.
#87
Posted 04 September 2016 - 12:33 AM
Saw this in person tonight and it looks great.
I would love to see this next to Marty's car, they look to be almost the exact same colour and it looks great on the little Toranas.
The kids were arguing about whether it is red or orange lol.
Nice to meet you Johnny, sorry I wasn't very talkative, been a long few weeks at work and I was ready for a sleep lol.
#88 _Caustic_
Posted 05 September 2016 - 08:34 PM
Edited by Caustic, 05 September 2016 - 08:35 PM.
#89 _Caustic_
Posted 10 September 2016 - 11:58 PM
#90
Posted 11 September 2016 - 12:04 AM
#91
Posted 11 September 2016 - 12:21 AM
the spinning electronic distributor disc - Power, Power, Power
#92
Posted 11 September 2016 - 12:23 AM
It's keyed to the shaft with a tiny roll pin from memory.
#93
Posted 11 September 2016 - 12:42 AM
I'll look tomorrow...........I'm doubting myself now.
#94 _Caustic_
Posted 11 September 2016 - 01:07 AM
#95
Posted 11 September 2016 - 06:55 AM
There's a "v" shaped key that locates in the shaft, it is common to fail. The fix is to file a small groove into the wheel then fit a "Roll pin".
#96 _Caustic_
Posted 11 September 2016 - 10:05 AM
As Warren said, I ended up cutting a goove into the reluctor wheel under the rotor cap, using a hacksaw and file,
I made a short section of key steel using an old allen key, and it worked a treat.
Pictures of the damaged wheel,amazing that it can happen when theres no load on that part..
many thanks.
#97 _Caustic_
Posted 11 September 2016 - 10:27 AM
Earlier the that day I decided to fully tune Lc to see what was going on after the cam change...Wet and dry comp test,reset the roller rockers,change the jets and timing and solve the oil breathing problems.
There was alot of pros and cons with this upgrade...
After the cam change the car was starting to smoke like a freight train,notice that the new cam and lifters were throwing oil directly at the pcv valve,so i fitted a catch can,which solved the smoke problem but a 40k drive would collect 100mm of oil.
Solved the oiling problem by refiting a factory rocker,still using the catch can it works a treat,with no oil collected now.
Comp test came up around 180 to 190 across the cylinders.
Changed the jets down to a size 60 and set the timing at 16 btdc seems shaper.
Now when Im out driving the car it has to be in 3rd to travel at 50-60ks..
Spoke to Clive cams and he tells me the cam Ive got,is the first design of the LJ xu1 cam..has around 449"..of lift,
I know thats not an accurate assumption, but when Ive got time, I will set up my degree wheel to find out what it actually is.Power band is around the 2800-6300..
some progress pics.cheers.
#98
Posted 11 September 2016 - 05:41 PM
Lol................maybe that's why I was doubting myself? Probably seen both along the way. This is how I set the air gap.
Attached Files
#99 _Caustic_
Posted 13 January 2018 - 06:02 AM
#100
Posted 13 January 2018 - 10:40 PM
John, know the feeling, will finally get to start back on my LC-LJ project after a year of things to do around the place including building a rear deck/entertaining area. Glad you decided to keep the car, keep the updates coming! Paul
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users