Does anyone know where to get an original LX master cylinder. I want my current torana to be as close to factory as is humanly possible. When i had to replace the one on my hatch all i could find were the new PBR type's which are no doubt better in design but look at little out of place. If anyone knows where they have the old original square types for sale please let me know.
Original master cylinders for LX
Started by
_Poggy_
, Nov 10 2005 09:36 PM
4 replies to this topic
#2
dattoman
-
- Administrators
-
- 16,472 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 10 November 2005 - 09:47 PM
The large pipe outlet is it to the front of the car or towards the booster
I'm sure I have a few (dozen) lying around somewhere
Got a pic of one ?
I'm sure I have a few (dozen) lying around somewhere
Got a pic of one ?
#3
_Poggy_
_Poggy_
-
- Guests
Posted 11 November 2005 - 01:35 PM
Outlet towards front of car. Havnt got a pic of one but i do have one sitting in the garage but it's cactus. I know you can get them redone but it's costly and id rather get a new one if possible. The new replacement modern types have circular lids. You can tell the older ones by the large rectangular lids. Still split into two sections of course. I had to replace my old one on the hatch because the seal was gone on the lid and you cant get new seals so had to get a whole bloody master cylinder.
Edited by Poggy, 11 November 2005 - 01:36 PM.
#4
_Yella SLuR_
_Yella SLuR_
-
- Guests
Posted 11 November 2005 - 01:42 PM
You talking Master Cylinder or Master Cylinder Reservoir? Sounding more like the reservoir from your description of the caps.
#5
dattoman
-
- Administrators
-
- 16,472 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 11 November 2005 - 08:06 PM
Yes you can still get the cap rubbers seperatly
No you can't buy the cast iron cylinder new anymore
Yes I can recondition the old one for you so it will fit back on and work
No you can't buy the cast iron cylinder new anymore
Yes I can recondition the old one for you so it will fit back on and work
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
