Banjo centre swap
#1 _mal_b_
Posted 21 October 2006 - 11:42 PM
Any responses are very appreciated as I'm in a bit of a pickle with this one
Cheer, Mal
#2 _V8Hatch_
Posted 21 October 2006 - 11:48 PM
#3
Posted 22 October 2006 - 12:10 AM
#4 _CHOPPER_
Posted 22 October 2006 - 11:50 AM
#5 _on the limit_
Posted 23 October 2006 - 07:23 PM
thats correct, all hz were factory fine splines, hx were combo's, corse & fine splines.Most, if not all HZ's had fine spline from the factory. This of course could have been altered over the years. Only 1973 Bathurst XU-1 had fine spline from what I've been told.
#6 _mal_b_
Posted 23 October 2006 - 09:25 PM
cheers, mal
#7 _CHOPPER_
Posted 23 October 2006 - 09:33 PM
#8
Posted 24 October 2006 - 12:33 PM
where are you located? I have a 3.55 coarse spline centre sitting in my wardrobe.
#9 _mal_b_
Posted 25 October 2006 - 08:00 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users