XU-1 heatshields
#1
Posted 30 January 2007 - 11:21 AM
I'm considering making another small run.
Paul
#2
Posted 30 January 2007 - 11:49 AM
how much?
#3
Posted 30 January 2007 - 03:13 PM
#4 _oz772_
Posted 31 January 2007 - 06:27 PM
#5
Posted 31 January 2007 - 08:23 PM
Cheers
Loui
#6
Posted 31 January 2007 - 09:18 PM
#7 _Mr Magoo_
Posted 31 January 2007 - 09:38 PM
Do these heatshields fit under the stromies regardless of what type of extractors are being used?
Cheers ~ Peter
#8
Posted 01 February 2007 - 09:40 PM
Not sure , maybe someone here can answer that. I've got the cast iron headers on mine...
Paul
#9 _JuniperGTR_
Posted 03 February 2007 - 04:43 PM
Thanks.
#10
Posted 03 February 2007 - 05:02 PM
HiDo these heatshields fit under the stromies regardless of what type of extractors are being used?
I have had extractors and headers and I used the same heatshield with both.
Bazza
#11 _pipjones_
Posted 04 February 2007 - 03:28 PM
#12
Posted 04 February 2007 - 05:54 PM
#13 _Mr Magoo_
Posted 04 February 2007 - 06:37 PM
#14
Posted 07 March 2007 - 02:12 PM
The tabs are being spot welded on as we speak and tomorrow they'll
gp off to the platers...
#15
Posted 07 March 2007 - 08:17 PM
#16
Posted 08 March 2007 - 05:16 AM
#17 _tuffgong_
Posted 08 March 2007 - 06:56 AM
cheers the gong
#18 _WYLDLC 6_
Posted 08 March 2007 - 07:16 AM
Cheers Chris
#19 _gtrtorana_
Posted 11 March 2007 - 09:54 PM
Same question but instead of webers, strombergs with pacemakers.Will they fit with webers and pacemaker extractors
#20
Posted 12 March 2007 - 11:06 AM
All I can say is take 1 and try it. If it doesn't fit , send it back..
#21 _UFO XU1_
Posted 12 March 2007 - 08:35 PM
#22
Posted 12 March 2007 - 09:05 PM
I spotwelded the 3 tabs on today. Off to the platers tomorrow.
Things are happening slower than expected..
#23
Posted 27 March 2007 - 02:24 PM
Paul
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users