Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

LC/LJ front sway bar

Started by _uglybob_ , Mar 23 2007 07:11 PM

Please log in to reply

10 replies to this topic

#1 _uglybob_

Guests

Posted 23 March 2007 - 07:11 PM

hey guys iv seen this front sway bar on ebay
http://cgi.ebay.com....1QQcmdZViewItem

iv been wanting to get one for a while but i wanted to know if there where differnt types
as in do some have differnt mounts or are there any better then others?
any feedback would be appreciated.

cheers
ben

Back to top

#2 _LoneOranger_

Guests

Posted 23 March 2007 - 09:34 PM

Ben, I have a 22mm Selbys (Whiteline) bar on my car.
It mounts up the same as this bar, but has a dip on the left side for clearance if you have extractors on your car.
John.

Back to top

#3 _73LJWhiteSL_

Guests

Posted 23 March 2007 - 10:59 PM

22mm Whiteline Swaybar mounted under the LJ.

Posted Image

This is the 'bump' under the extractors in the bottom right hand side of the pic.

Posted Image

Heres a better shot of it mounted. The front is mounted on the bottom of the castor rods.

And yes I know, I have oil leaks :tease:

They are really good. Car corners very flat with that one in place. Very happy with it. :rockon:

Steve

Back to top

#4 _LoneOranger_

Guests

Posted 24 March 2007 - 08:29 AM

Yep Steve,
That's the bar.
Ben, The sway bar in the picture appears straight.
You may have clearance problems if running extractors.
Best to check with the seller.
John.

Back to top

#5 _dickiep_

Guests

Posted 24 March 2007 - 12:48 PM

im currently running a shelby sway bar. does anyone with one have clearance issues on speed bumsp, dips, just about anything?

Back to top

#6 _LoneOranger_

Guests

Posted 24 March 2007 - 12:51 PM

No problems with mine.
And it is running lower than standard height. about 1 1/2 "
John.

Back to top

#7 _dickiep_

Guests

Posted 24 March 2007 - 01:00 PM

i just double checked mine and it is bout 1.5-2 inch off the ground stationary on a level surface. i cringe everytime i go over a speed bump or dip

Back to top

#8 _73LJWhiteSL_

Guests

Posted 24 March 2007 - 05:37 PM

My sway bar comes out about 9cm off the ground under the extractors. I just have to watch out for the really tall speedhumps. Mine only scaps on about 2 or 3 in 10.

Steve