engine conversion for lj 4 door torana
#1 _70rey_
Posted 17 January 2006 - 07:13 PM
i am lookin into this seriously and would like some help as to the problems i face... i also have a vn engine ready to go in if its too much trouble...
anyone know how hard it is to convert a 3.8 1989 vn engine from auto to manual.
thanks for your help all... any advice is good advice
#2 _tuff30l_
Posted 17 January 2006 - 07:34 PM
#3 _70rey_
Posted 17 January 2006 - 07:59 PM
thanks so much
#4
Posted 17 January 2006 - 08:46 PM
#5 _70rey_
Posted 17 January 2006 - 09:35 PM
i guess it cant be that hard then...
#6 _Terrible One_
Posted 17 January 2006 - 11:08 PM
Just out of curiosity, is 70REY your personalised plates? I've got very similar ones.
#7 _dansedgli_
Posted 18 January 2006 - 06:38 AM
I had to cut the lip off the firewall at the top with a grinder but other than that it was a straightforward job.
#8
Posted 18 January 2006 - 11:16 AM
#9
Posted 18 January 2006 - 11:48 AM
#10 _NVMYLH_
Posted 18 January 2006 - 12:41 PM
http://www.cardomain.com/ride/421999
Edited by NVMYLH, 18 January 2006 - 12:42 PM.
#11
Posted 18 January 2006 - 12:49 PM
#12 _70rey_
Posted 18 January 2006 - 08:37 PM
yer i got the last plates in qld that say "70rey"See if you can get a hold of Bart, he's around here somewhere. He's got a 2 door LJ with a RB30ET in it, I think it's all been pulled apart again.
Just out of curiosity, is 70REY your personalised plates? I've got very similar ones.
i was proud that day
#13 _70rey_
Posted 18 January 2006 - 08:40 PM
i got a mob that wanna charge me 7 grand for the engine box and a new 9" diff to be put in...
is that good???
#14 _70rey_
Posted 18 January 2006 - 09:05 PM
cos i got a quote today that a guy wants to charge me 7 to fit the motor gearbox and put in a new 9" diff...
is this a good price... and does anyone know of anyone in brissie that can put it in for me....
thanks again
#15 _jap-xu1_
Posted 18 January 2006 - 09:11 PM
#16 _70rey_
Posted 19 January 2006 - 09:01 PM
im ringing the rod shop tomorrow about the sump and engine mounts
#17
Posted 19 January 2006 - 09:39 PM
#18
Posted 20 January 2006 - 12:12 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users