chev / Red holden 6 compatablity
#1 _superlowuc_
Posted 30 January 2006 - 10:08 AM
on my other threads I have found out fuel pump roller rockers and valve spring ant thing else you guys know about?
thanks again I am greatful for you input
antony
#2 _Bomber Watson_
Posted 30 January 2006 - 07:00 PM
#3 _CHOPPER_
Posted 30 January 2006 - 09:36 PM
#4 _Bomber Watson_
Posted 30 January 2006 - 09:45 PM
just saying the ones I TRYED didn't fit onto MY HEAD which is a 149 head with 3/8 studs. to go bigger studs would require takign to much out of the bosses imo. they would be weak.
so, i suppose the only advice i can give is be carefull what you get.
#5 _CHOPPER_
Posted 30 January 2006 - 09:55 PM
Standard SBC rockers have a 3/8" stud. Just like all Holden 6 heads, except for 173 and 202 heads. YT 5007 is the part number for YT roller rockers.
And as lcboi said, there are 7/16" stud size as well.
#6 _Bomber Watson_
Posted 30 January 2006 - 10:05 PM
#7 _82911_
Posted 30 January 2006 - 10:26 PM
Cheers Greg..
#8 _superlowuc_
Posted 31 January 2006 - 12:45 AM
thanks again
#9 _82911_
Posted 31 January 2006 - 07:31 AM
And very old now.
You will be fine with the parts you bought!
Cheers Greg..
#10
Posted 31 January 2006 - 02:25 PM
#11 _CHOPPER_
Posted 31 January 2006 - 10:18 PM
Greg, we were originally talking about the rockers, not the studs.But all screw in studs weather 3/8 or 7/16 UNF are 7/16UNC on the end that screws into the head....
Cheers Greg..
#12 _82911_
Posted 01 February 2006 - 07:19 AM
I was replying to....
just saying the ones I TRYED didn't fit onto MY HEAD which is a 149 head with 3/8 studs. to go bigger studs would require takign to much out of the bosses imo.
Cheers Greg..
#13 _CHOPPER_
Posted 01 February 2006 - 07:31 PM
#14 _82911_
Posted 01 February 2006 - 09:23 PM
Cheers Greg..
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users