my rally red lc gtr
#1 _gtr161s_
Posted 12 February 2006 - 09:39 AM
The pics are the 1st day i arrived home with it. Its been off the road since '92 for repairs of panel and rust etc but never got finished properly. Ive basically stripped the guards off, inner drivers guard, front apron, rebuilt driver door pillar, rear drivers quarter, rear pass guard lip, both front floors, boot wheel well, sills. Have i missed anything!!!
Up to date everything has been complete except for the rear windscreen lower panel which i'll have finished next week.
When it comes to stuff like this im a really fussy so if it didnt look right after it was welded up i'd do it again ( setting door hinge and pillar i redone 3 times )
I'll get the pics to date ready soon and post them. Kev
https://cache.gmh-to...allyredgtr3.jpg
https://cache.gmh-to...allyredgtr2.jpg
https://cache.gmh-to...allyredgtr1.jpg
https://cache.gmh-to...allyredgtr4.jpg
#2
Posted 12 February 2006 - 03:01 PM
Mate you have a big job on your hands but im sure you will manage, id love to see the repaired pics, its great to see the before and after.
Thankfully there are people like you who pic up these cars which are seemingly ready for the tip and loveingly restore them, good on ya mate.
#3 _gtr161s_
Posted 12 February 2006 - 04:18 PM
Here's a mixed bag of pics, the best score was getting a mint lc sl 4dr with only quarter panel damage then disecting it.
My car looks like its been an xu-1 for along time hence the shot of the original guard.
Setting the rear guard lip is difficult i'd rather do a quarter any day.
The floors came up a treat.
The tunnel had a large section cutout once and replaced with sheet iron, still cant figure out what they were doing maybe gearbox repairs!!
https://cache.gmh-to...llyredgtr23.jpg
https://cache.gmh-to...llyredgtr15.jpg
https://cache.gmh-to...llyredgtr82.jpg
https://cache.gmh-to...llyredgtr26.jpg
https://cache.gmh-to...llyredgtr14.jpg
https://cache.gmh-to...rallyredgtr.jpg
#4 _jap-xu1_
Posted 12 February 2006 - 04:27 PM
#5 _jap-xu1_
Posted 12 February 2006 - 04:31 PM
#6 _gtr161s_
Posted 12 February 2006 - 04:36 PM
#7
Posted 12 February 2006 - 07:14 PM
Best of luck!
RACV MAN
#8
Posted 12 February 2006 - 07:50 PM
Great looking project mate, looks like you're doing great work on the body, keep us updated!
#9 _gtr161s_
Posted 12 February 2006 - 08:33 PM
#10
Posted 12 February 2006 - 11:10 PM
#11 _gtr161s_
Posted 13 February 2006 - 07:10 AM
#12 _jabba_
Posted 13 February 2006 - 10:00 AM
Thanks
Damien
#13
Posted 13 February 2006 - 02:00 PM
#14 _gtr161s_
Posted 13 February 2006 - 08:55 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users