v8 alternator bracket with aircon
#1 _trav_
Posted 19 February 2006 - 09:12 PM
thanks trav
#2
Posted 20 February 2006 - 08:51 AM
#3 _trav_
Posted 23 February 2006 - 11:14 PM
i can show you a pic of the bracket fitted to the car ,but without the compressor fitted if your stuck
yiri i dunno if you got my pm but it would be great if you could me a pic without the compressor attached
thanks trav
#4
Posted 27 February 2006 - 05:51 PM
THIS ANY HELP?
#5 _Yella SLuR_
Posted 27 February 2006 - 07:28 PM
#6
Posted 27 February 2006 - 08:00 PM
#7 _lx5008_
Posted 27 February 2006 - 08:06 PM
#8 _Yella SLuR_
Posted 27 February 2006 - 08:18 PM
Sorry, scanner is broke, so can't scan it.
#9
Posted 27 February 2006 - 08:41 PM
#10 _lx5008_
Posted 27 February 2006 - 08:56 PM
#11 _devilsadvocate_
Posted 27 February 2006 - 09:06 PM
In the LH which I have the manual for both the 6 and the 8 had the hose fittings for the condensor on the right side going (with the hoses going over the rad support panel), which meant the aircon hoses in the 6 went on a longer route across/round the top of the motor.
My Uc has the aircon hose attachments to the condensor on the left and what looks like a factory type hole for them to go through the rad support panel rather than over the support panel. I know my system was not fact fitted, does anyone else there have a UC(or the fact manual on a/c) and can tell me which side the hoses are on with fact system?
Edited by devilsadvocate, 27 February 2006 - 09:08 PM.
#12
Posted 27 February 2006 - 09:12 PM
#13 _devilsadvocate_
Posted 27 February 2006 - 09:23 PM
#14
Posted 27 February 2006 - 09:28 PM
#15 _trav_
Posted 27 February 2006 - 09:55 PM
trav
#16
Posted 28 February 2006 - 02:02 PM
#17 _trav_
Posted 28 February 2006 - 02:22 PM
trav
#18
Posted 28 February 2006 - 02:28 PM
#19 _trav_
Posted 01 March 2006 - 03:56 PM
trav
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users