I think we need to start a black list Torana dealer / ebay seller etc and have it pinned!
if it hasnt happened already
Help Wanted
Started by
_racyrabbit_
, Sep 19 2008 08:13 PM
99 replies to this topic
#76
Edk
-
- Members
-
- 99 posts
Forum Member
- Location:Melbourne
- Joined: 15-February 09
Posted 26 February 2009 - 08:31 PM
#77
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 26 February 2009 - 08:47 PM
Thanks for your input freaky, Unfortunately a black list can be a bad idea for many reasons (as many as there are good reasons for one!).
This particular thread is not the one to discuss it in however. I'd like this thread to be solely for people personally involved in this particular disagreement.
Thanks!
This particular thread is not the one to discuss it in however. I'd like this thread to be solely for people personally involved in this particular disagreement.
Thanks!
#78
_mercsilver_
_mercsilver_
-
- Guests
Posted 11 March 2009 - 01:15 PM
Gidday to all,finally I've got an influx of emails from all the right people,A BIG THANKS TO ""TINY ""& everyones else advice,been quite busy photocopying all paper work,the first one goes off today to fair trading,Good luck.everyone.
#79
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 12 March 2009 - 02:59 PM
Best of luck Mercsilver!
#80
_mercsilver_
_mercsilver_
-
- Guests
Posted 12 March 2009 - 07:41 PM
Will keep you all informed to what is going on with this situation,lets hope that everyone else whom has been affected by this will follow suit,& not to give up.Still like to have faith in the system,even though it lets us down so often. Don't forget this weekend is the 1st NDMA/AUTO PRO car show at Port Augusta,more info on this is posted on GMH-Torana site.My ute comes back 2moro from paint shop,minus the above mentioned bonnet,again,cutting it fine,got alot of detailing 2 do.Thanks guys.
#81
_easprint_
_easprint_
-
- Guests
Posted 20 March 2009 - 09:54 PM
im definately over it!. But looks as though the authorities are trying to do there best to sort him out. Ill keep you people posted on the outcome.
#82
_jensvs_
_jensvs_
-
- Guests
Posted 27 March 2009 - 08:35 AM
Hi everyone, guess what i finally got my bonnet but low and behold its only half finished he didnt even prep the other side of the old bonnet nor do the flutes where the water will just pool in. Spoke to Daniel he says he would pay to have it fixed if i got quotes done i did the cheapest i could get and it was $500 and all have said that its very very unroadworthy. But now once again he wont answer my calls so WELL DONE DANIEL 
. So it looks like im going to take him to small claims court as i have had enough of dealing with the numbnuts. 
Also when i get the pictures i will post so everyone can see what im on about!
. So it looks like im going to take him to small claims court as i have had enough of dealing with the numbnuts. Also when i get the pictures i will post so everyone can see what im on about!
#83
_jensvs_
_jensvs_
-
- Guests
Posted 23 May 2009 - 03:37 PM
stupid camera not working atm, but ive been trying to sell the stupid bonnet real cheap but guess wat no one wants to buy it cause its a piece of crud. So lookout hes still on ebay another name again
#84
_mercsilver_
_mercsilver_
-
- Guests
Posted 23 May 2009 - 04:02 PM
stupid camera not working atm, ,but ive been trying to sell the stupid bonnet real cheap but guess wat no one wants to buy it cause its a piece of crud. So lookout hes still on ebay another name again
Hi guys,can't get no satisfaction.....still awaiting on Fair Trading,maybe there's that many the process has them in shock.Might have to go & have a look on Ebay,thanks.
#85
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 23 May 2009 - 04:11 PM
I'm so sorry to hear this is still going on!
I had hoped with the lack of replies in here that the problem had been rectified!
Keep us updated and all the best with it.
I had hoped with the lack of replies in here that the problem had been rectified!
Keep us updated and all the best with it.
#86
_mercsilver_
_mercsilver_
-
- Guests
Posted 23 May 2009 - 06:35 PM
Gidday,Tiny, things have been abit quiet,just playing the waiting game.Quiet but not forgotten.
#87
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 23 May 2009 - 06:43 PM
I'm glad to hear it's not forgotten, I'm just really saddened to hear that it's not resolved.
I had hoped that after his appearance here to reassure everyone that things might be on the right path, But it appears NOT!
Have the authorities been of assistance?
All the best with it.
I had hoped that after his appearance here to reassure everyone that things might be on the right path, But it appears NOT!
Have the authorities been of assistance?
All the best with it.
#88
_mercsilver_
_mercsilver_
-
- Guests
Posted 26 May 2009 - 09:23 AM
I'm glad to hear it's not forgotten, I'm just really saddened to hear that it's not resolved.
I had hoped that after his appearance here to reassure everyone that things might be on the right path, But it appears NOT!
Have the authorities been of assistance?
All the best with it.
Got some guys from(SA) MITA coming this week to take photo's of his workmanship,than they can assist with this nightmare.Than we'll see who's laughing last
#89
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 26 May 2009 - 08:14 PM
Well that's a step in the right direction!
I'm glad that the authorities are stepping in, and hopefully cna bring this to an end soon.
Regards!
I'm glad that the authorities are stepping in, and hopefully cna bring this to an end soon.
Regards!
#90
_mercsilver_
_mercsilver_
-
- Guests
Posted 06 June 2009 - 05:45 PM
[quote name='Tiny' post='402678' date='May 26 2009, 09:14 PM']Well that's a step in the right direction!
I'm glad that the authorities are stepping in, and hopefully cna bring this to an end soon.
Regards![/quote]
Got a reply from Fair Trading,[quote:Attempts have been to contact Mr said person has not been successful.],but for a fee,you can lodge a claim with the Consumer,Trader & tenancy Tribunal.Boy does this sound familiar,typical govt crap.Think I'll go with PI,friend in NSW,well at least I'll get some sort of satisfaction & feedback.
I'm glad that the authorities are stepping in, and hopefully cna bring this to an end soon.
Regards![/quote]
Got a reply from Fair Trading,[quote:Attempts have been to contact Mr said person has not been successful.],but for a fee,you can lodge a claim with the Consumer,Trader & tenancy Tribunal.Boy does this sound familiar,typical govt crap.Think I'll go with PI,friend in NSW,well at least I'll get some sort of satisfaction & feedback.
#91
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 07 June 2009 - 11:37 AM
*Shakes head*....
I feel frustrated.. I can only imagine what you guys are going through!
Good luck with it!
I feel frustrated.. I can only imagine what you guys are going through!
Good luck with it!
#92
_mercsilver_
_mercsilver_
-
- Guests
Posted 07 June 2009 - 04:27 PM
Frustrated.. there are other words for this,how come every-day people know where he is,can get licence details (from other purchasers whom have been duped)+photo's(face book),phone numbers (from ebay + through previous communication),home & workshop addresses(google earth),ABN (...gov.au)etc & yet they can't contact him,yep typical gov.dept's always trying to screw you over in some way.Maybe if they got off their a...s & did something positive & work for the people that help to contribute to their pay slip,they would'nt get so much negitive feedback.I know I have to work hard for my pay,these just look at it,try to ring once or twice & say to hard & put it in the to hard basket,if I did my job like this,I would'nt have a job,I work at a power station,something breaks,oh try to fix problem,did'nt work this time,put in 2hard basket,& see what happens.Same shit,just different job,I don't sit behind a desk either,I'm in the grotty side of coal power stations.Till next time,have a good long weekend. 
#93
Rockoz
-
- Members
-
- 3,969 posts
Lotsa Posts!
- Name:Rob
- Location:Cowra NSW
- Joined: 21-September 08
Posted 07 June 2009 - 05:38 PM
Nearly every time I have dealings with Fair Trading I end up asking them who I contact to complain about them.
Took 6 years on and off to get a conclusion to a Trade license issue.
Cost me a significant amount over a tenancy issue.
Had someone call me for a survey after one lot of complaints I had with them. Was an absolute joke.
Would have to be about the worse gov. dept I have dealt with.
I would investigate private solutions to your problem.
Took 6 years on and off to get a conclusion to a Trade license issue.
Cost me a significant amount over a tenancy issue.
Had someone call me for a survey after one lot of complaints I had with them. Was an absolute joke.
Would have to be about the worse gov. dept I have dealt with.
I would investigate private solutions to your problem.
#94
_easprint_
_easprint_
-
- Guests
Posted 10 June 2009 - 05:43 PM
Frustrated.. there are other words for this,how come every-day people know where he is,can get licence details (from other purchasers whom have been duped)+photo's(face book),phone numbers (from ebay + through previous communication),home & workshop addresses(google earth),ABN (...gov.au)etc & yet they can't contact him,yep typical gov.dept's always trying to screw you over in some way.Maybe if they got off their a...s & did something positive & work for the people that help to contribute to their pay slip,they would'nt get so much negitive feedback.I know I have to work hard for my pay,these just look at it,try to ring once or twice & say to hard & put it in the to hard basket,if I did my job like this,I would'nt have a job,I work at a power station,something breaks,oh try to fix problem,did'nt work this time,put in 2hard basket,& see what happens.Same shit,just different job,I don't sit behind a desk either,I'm in the grotty side of coal power stations.Till next time,have a good long weekend.
Don't worry..i got the same response from fair trading. Don't worry Omer Danny...whoops i mean Daniel Comer will get his own back!
#95
_john09_
_john09_
-
- Guests
Posted 04 November 2009 - 09:34 PM
Hello needing to find a particular panel beater in SYDNEY he sells manaro bonnets on ebay ,he says he is in Camdem? Another address i have is in Ingleburn , I have 2 names a LUKE and a Daniel COMER , Can any body supply me with their address ??Just PM or email me the matter is urgent , TREX
Daniel is currently in lock up, and is getting sentenced at the Downing Center on Friday 6th of November 2009.
You can find Luke thought at 4 Rider place Minto, Just off longhurst. I simply type in his name just for laughts and didnt expect to be a whole forum about it.
Daniel has NEVER lived in Ingleburn or Camden. His buissness was located at Myrtle place Minto Heights, then moved over 2 years ago to Ingleburn industrial.
I dont have his mobile number, good luck getting your cash off him thought, feel sorry for those that belived his endless shit.
<source> live in the area an know 1st hand his a shady ratbag
#96
_saloon_
_saloon_
-
- Guests
Posted 02 December 2009 - 02:24 PM
Daniel Comer is now serving a six year sentance for attempted murder in Long Bay max security. I was told this today by Greg Comer and varified by another soyrce. I was trying to serve judgement papers on him for money owed, we can kiss that good by. G. Comer may still be liable as invoice states G. Comer t/AS Sydney Color and Equipment. Hope this is of some help, maybe just as well we did not find him first.
#97
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 02 December 2009 - 07:19 PM
Very interesting news,
Thanks for letting us know.
Thanks for letting us know.
#98
_easprint_
_easprint_
-
- Guests
Posted 03 December 2009 - 10:07 PM
Daniel Comer is now serving a six year sentance for attempted murder in Long Bay max security. I was told this today by Greg Comer and varified by another soyrce. I was trying to serve judgement papers on him for money owed, we can kiss that good by. G. Comer may still be liable as invoice states G. Comer t/AS Sydney Color and Equipment. Hope this is of some help, maybe just as well we did not find him first.
Suck on that Daniel.....What goes around comes around!. Well ive kissed $1000 goodbye...Daniel can kiss the next six years goodbye. Have a nice time you TOSSER!
#99
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 04 December 2009 - 12:52 PM
Attempted Murder??
Can this loser do anything right?
Bear in mind guys that you can still be charged for other crimes (such as fraud), while you are serving a sentence for another crime.
Can this loser do anything right?
Bear in mind guys that you can still be charged for other crimes (such as fraud), while you are serving a sentence for another crime.
#100
bryanw
-
- Members
-
- 294 posts
Forum Fan
- Location:mildura
- Joined: 04-July 06
Posted 06 December 2009 - 12:31 AM
what would be the quickest way to get people to stop chasing you for money? jail/murder?
person serving judgement papers? (what are judgement papers anyway?) one would expect they would be able to spell.
also would know the persons location if incarcerated.
they would not divulge these details on a forum.
you would expect if "Daniel Comer is now serving a six year sentence for attempted murder in Long Bay max security". it would come up on google.
keep digging
person serving judgement papers? (what are judgement papers anyway?) one would expect they would be able to spell.
also would know the persons location if incarcerated.
they would not divulge these details on a forum.
you would expect if "Daniel Comer is now serving a six year sentence for attempted murder in Long Bay max security". it would come up on google.
keep digging
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
