
carpet from tru fit
#51
_Oldn64_
Posted 07 November 2006 - 02:33 AM
Anyways
Cheers
#52
_gtr161s_
Posted 15 November 2006 - 07:38 PM
Fitted perfectly but in saying that my nephew just had some posted in a nice ball, it is going to be hell to refit!
Looking at his i'd be inclined to try a carpet layer iron or leave it out in the hot sun for a few hours to soften.
#53
_Monkey_
Posted 15 November 2006 - 08:43 PM
I bought carpet from the dash doc 4 my LJ & my best girls gemini. no dramas here. fitted well.hey guys i got mine the other day from the dashboard doctor in coburg and some underlay all up $130 and a 3 day wait ill just have to wait till its time to fit it

#54
_cal-a-kid_
Posted 11 February 2008 - 06:58 PM
Dean
#55
Posted 11 February 2008 - 07:19 PM
we are cheaper than qmcc and thats were we get ours from, was there a problem with the price you were quoted from us?
#56
_cal-a-kid_
Posted 11 February 2008 - 10:15 PM
Dean
#57
Posted 12 February 2008 - 04:15 PM
Knox in melbourne does superplush and so does tru fit..
#58
_cal-a-kid_
Posted 12 February 2008 - 07:50 PM
Dean
#59
Posted 12 February 2008 - 08:38 PM
qmcc
retail price from them i dont no, but i did see a price list somewhere from them it was $170 for plush, dont quote me on that as it could be more or less...
if really after superplus i would go knox in melbourne
Edited by boomfunk, 12 February 2008 - 08:39 PM.
#60
_cal-a-kid_
Posted 12 February 2008 - 09:48 PM
Dean
#61
Posted 13 February 2008 - 04:01 PM
I keep asking if there any updates with products...so yeah, first i heard about it
Apparently can do all colours, what did they quote you on f/r in superplush
The only diff between super plush and plush is the height of the pile, thats it.
It came in the calais and i beleive sle commodores, i mean i think it looks rediculous on door trims, we have it on our calais door trims..its like 3/4 inch height.
On the floor its probably good, but honestly its personal preference, it most likely be harder clean...loops the easiest and longest wearing carpet
just my personal preference but i beleive the carpet like mercedes carpet is best looking, its short, like plush but really thick
each to there own, im keen on knowing what they quoted you for the super plush f/r
#62
_moot_
Posted 13 February 2008 - 07:18 PM
i use the merc style car in some of my customer cars,but you have to cut and sew it,and its costs a fortune

#63
Posted 13 February 2008 - 07:43 PM
M@
#64
Posted 17 February 2008 - 11:17 AM
But the 9 week wait was a killer.
I've also used Knox & reviva carpet sets. Both ok.
The set i have in now is from QLD MCC.
The fit was excellent. It doesn't matter how long the carpet is left for, it will fit.
QMCC were very helpfull to me. I asked for a boot carpet also; without the spare wheel recess as i now have a flat floor; no problem & more importantly NO EXTRA CHARGE! 2 weeks from order to delivery.
I will use them again & i cant praise them enough! Thanks QMCC.
As for installation, all i do is throw the carpet on the floor, wind up all the windows, & leave the car in the sun for a day!
Then starting at the trans tunnel, poke a screwdriver thru the seatbelt holes, dont remove the screwdriver.
Lift the carpet, put a block of wood under & use a hole punch [wad punch] to put the holes in. Screw the bolts in to hold the carpet in place, then do the same with the seat bolt holes. The carpet wont move!
Start to finish takes about 2 hrs. Easy.
#65
_moot_
Posted 18 February 2008 - 06:38 AM
and you are fitting it the hard way.


#66
Posted 18 February 2008 - 04:49 PM
& i ordered 'grey' which was just not on the shelf. I was told it had to be made specifically & would only be done when they were making the next batch of torana carpets.
I might be fitting them wrong, but i've never had a stray cut.
Seen heaps of them though!

#67
_SableMet7/73_
Posted 18 February 2008 - 04:58 PM
went to fit but buggered if it would. The wells were too
wide for the floorpan. They reckoned I was doing something
wrong so came back with theirs & the plush that came out.
Laid down on top you could see it wasnt right. After a bit
of arguing they took me out & showed me the moulds & when
they tried to fit it to their LJ mould- too big. So I saw the LH
mould & threw it on, Hey presto it fits. DOHHHHHHH!!!!
It was their mistake, sales docket said LJ, & did me a LJ set
while I waited no dramas but it was a long wait.
COMUNICATION BREAKDOWN.
Jono
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users