Anyone done a MSD ignition into lh torana?
#1 _75LH_
Posted 08 April 2006 - 12:11 PM
matt
#2 _CHOPPER_
Posted 08 April 2006 - 01:47 PM
#3 _Torana308_
Posted 08 April 2006 - 02:11 PM
#4 _75LH_
Posted 08 April 2006 - 02:29 PM
the msd instructions say only have the msd wires on the coil and run the other red to the switch. I don't no where to connect the red on the switch or does it not matter?
sorry im confused
#5 _CHOPPER_
Posted 08 April 2006 - 02:32 PM
#6 _Torana308_
Posted 09 April 2006 - 09:31 AM
#7 _ChiaLX_
Posted 09 April 2006 - 12:04 PM
#8
Posted 11 April 2006 - 12:28 AM
As Chopper has said the yellow/pink wire is connect to the light gauge red wire of the MSD. These wires should not be connected to the coil.
Hope that helps!
#9 _75LH_
Posted 11 April 2006 - 03:15 PM
#10 _Torana482HP_
Posted 12 April 2006 - 10:53 PM
And im pretty sure that if you connect the red msd wire to the tell tales/backup terminal on your fuse panel, you will be right - i cant really remember, i installed mine a while ago now, ill check tomorrow though.
Im pretty sure that terminal has power when cranking and while running.
#11 _JNR_ATE_
Posted 13 April 2006 - 07:32 PM
Sorry to steal the light, just thought i would ak before i brought it.
Cheers
JNR_ATE
#12 _Torana482HP_
Posted 13 April 2006 - 07:54 PM
its up to you if you want it, if you get your original dizzy recurved to your cam it will be just as good.
#13 _JNR_ATE_
Posted 13 April 2006 - 08:10 PM
Cheers
JNR_ATE
#14 _Torana482HP_
Posted 13 April 2006 - 08:39 PM
#15 _JNR_ATE_
Posted 14 April 2006 - 04:28 PM
Dizzy was built by the joint thats curving mine. Any one interested
Cheers
JNR_ATE
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users