hey guys n gurls,
just wondering if its possible that a 9 inch a9x diff will fit into an EH holden easilly, and if so where could i get one from prefrably somwhere close to brisbane? n e help u could give me would be really appricated
9 inch in an EH?
Started by
_rowdy85_
, Apr 10 2006 09:20 PM
2 replies to this topic
#2
LS1LX
-
- Members
-
- 1,931 posts
Forum Fixture
- Location:Sydney
- Joined: 22-November 05
Posted 11 April 2006 - 08:07 AM
Considering an A9X runs a 4 link diff setup and an EH has a leaf sprung rear, I'd say it wont be a simple weekend job getting it in there.
#3
_Sammy_
_Sammy_
-
- Guests
Posted 11 April 2006 - 08:48 AM
you'll need to cut all the torana control arm mounts off it and fit the EH spring saddles to it, as far as that goes its not that hard a process, i have fitted a UC salisbury into an EK once and the width was sweet, but im not sure if the 9 inch will be the same length or what .... but other than that it shouldn't be TOO hard.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
