out the bonnet 6cyl ?
#1 _T0rana_
Posted 18 April 2006 - 11:52 AM
#2 _Chaotic_
Posted 18 April 2006 - 12:33 PM
#3 _CHOPPER_
Posted 18 April 2006 - 06:26 PM
#4 _brett_32i_
Posted 18 April 2006 - 06:33 PM
worked well and no holes in bonnet
just another option...
#5
Posted 18 April 2006 - 06:34 PM
EDIT: Or Brett's suggestion
Edited by Heath, 18 April 2006 - 06:35 PM.
#6 _high_rpm_
Posted 18 April 2006 - 06:36 PM
#7 _Pete_
Posted 18 April 2006 - 07:06 PM
An air filter through the bonnet always looks tough to me, but some bonnet scoops can be a little tacky looking, i'll try and dig out some old photos of my LC and scan them.
#8 _Herne_
Posted 18 April 2006 - 07:33 PM
I have not seen many and this might just be because I have not looked hard enough or some people have similar thoughts to me and just don't like the look they give!
Perhaps I like things centered
Herne
#9 _brett_32i_
Posted 19 April 2006 - 07:03 PM
thing was tuff, ran either low 10 or 9 sec 1/4. but things in the centre look so much better....
#10 _torana_
Posted 19 April 2006 - 09:34 PM
#11
Posted 19 April 2006 - 09:52 PM
Air filters and superchargers look sweet offset, just don't cover them with plastic or glass and it'll be right... just not legal.
#12 _CHOPPER_
Posted 20 April 2006 - 07:02 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users