Fitting HQ Stubs on LC crossmember
#1 _dannylxss_
Posted 21 April 2006 - 11:34 PM
Any help would be great thanks i advance
Danny
#2
Posted 21 April 2006 - 11:46 PM
#3 _Torana308_
Posted 22 April 2006 - 12:20 AM
#4 _munro_
Posted 22 April 2006 - 12:33 AM
were there any problems? tom
#5 _dannylxss_
Posted 22 April 2006 - 12:41 AM
can you leave the HQ calipers and just put VL to VB disks
#6
Posted 22 April 2006 - 01:58 AM
LOL mine felt weird to with the big brakes if you nail the brakes it will almost put you through the windscreen.Yep was me who has done it. I still have pics etc here i used the larger vl - vp rotor with vs callipers front and rear. Doesnt feel like driving a torana cause it actually stops. Any info you want ill do my best to help out
#7 _CHOPPER_
Posted 22 April 2006 - 10:50 AM
I'd be interested in pics and the mods to the calipers to make them bolt up.Yep was me who has done it. I still have pics etc here i used the larger vl - vp rotor with vs callipers front and rear. Doesnt feel like driving a torana cause it actually stops. Any info you want ill do my best to help out
#8 _Torana308_
Posted 22 April 2006 - 01:21 PM
Thats a link to my photo bucket. Didnt modify callipers just got hadfield stubs and brackets and bolted away. Nothing overly exotic but one of the best things i did to the car in my opinion
#9 _CHOPPER_
Posted 22 April 2006 - 04:24 PM
#10 _dannylxss_
Posted 22 April 2006 - 05:55 PM
#11
Posted 22 April 2006 - 06:49 PM
#12 _CHOPPER_
Posted 22 April 2006 - 10:03 PM
#13 _dannylxss_
Posted 23 April 2006 - 09:02 AM
#14 _Torana308_
Posted 23 April 2006 - 11:14 AM
I guess the good thing about the Hadfield stuff is that you get the paperwork saying its pre approved as long as its installed right. I bought his stuff for this exact reason, i didnt want to get to rego time and have to redo things.
The front camber isnt quite perfect yet cause i need to lower the top arm mounts to give the upper arm more room to move in. The pipes are to close at the moment. Has anyone got a pic of where the lower mounts need to be drilled?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users