flat piece for battery tray
#1 _gen3torrie_
Posted 15 June 2010 - 01:38 PM
#2 _gen3torrie_
Posted 16 June 2010 - 11:31 PM
#4
Posted 18 June 2010 - 10:05 AM
Grab a sheet of 1mm thick steel, a 10cm long piece of 10mm rod,
find a stress relief point in your concrete around the house and hammer away.
Attached Files
#5
Posted 18 June 2010 - 06:58 PM
#6
Posted 18 June 2010 - 09:15 PM
I decided to trim it and just use the inside section so any joining would be hidden under that battery
but it back fired on me as the existing rusting metal edge was thining and welding was problematic.
However I managed to do it.
Attached Files
#7
Posted 18 June 2010 - 09:26 PM
I like how you had the reverse bead (roll) around the edge, I folded mine up all round, yours would have been a better idea for me.
#8 _gen3torrie_
Posted 18 June 2010 - 10:08 PM
#9
Posted 19 June 2010 - 07:37 AM
I'll have a look at mine and see if I can make the whole panel, I'll get back to ya.
Cheers.
Edited by lx8vd77, 19 June 2010 - 07:39 AM.
#10
Posted 19 June 2010 - 11:55 AM
#11 _Squarepants_
Posted 19 June 2010 - 01:06 PM
Josh, check out my thread in this section about "removing battery tray from LH/X".
#12
Posted 19 June 2010 - 01:29 PM
$125 plus postage.
#13 _gen3torrie_
Posted 20 June 2010 - 01:07 AM
so who actually makes one or can make me one???
my welding skills are better.
#14 _TJ308_
Posted 20 June 2010 - 02:23 AM
Jks josh
#15
Posted 20 June 2010 - 10:14 AM
well considering ive got no metal fab skills it would look pretty crap if i was to make myself lol
so who actually makes one or can make me one???
my welding skills are better.
Try a sheet metal shop. they might be able to make what you need.
#16
Posted 20 June 2010 - 12:01 PM
I made a battery tray section for my UC to get the RWC. Not factory-looking, (wasn't a concern), but plenty strong (I folded corrugations into it) and it passed the RWC no probs. I could make something for you in my own time, won't cost you anything, and you can decide for yourself if you want to use it or not.
#17 _gen3torrie_
Posted 20 June 2010 - 09:58 PM
#18 _gen3torrie_
Posted 12 September 2011 - 08:57 PM
#19 _355lh_
Posted 03 December 2014 - 03:19 PM
has anyone made some up yet? if so can I have a price and wat do they fit like?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users