Hi , Can anyone help me i'm looking for a set of door trim metal top bits for my lc xu-1 , as i went to buy new trims and they told me i needed the metal bits??
HELP!!!
interior help!!!
Started by
_mick400_
, Apr 29 2006 09:14 PM
6 replies to this topic
#1 _mick400_
Posted 29 April 2006 - 09:14 PM
#2 _Flamenco_
Posted 30 April 2006 - 12:04 AM
Unless you find someone on here willing to sell a set (put up an post in 'wanted to buy') the best place to find them would be on ebay or go to a few swap meets...
#3 _gtr161s_
Posted 04 May 2006 - 11:11 PM
Do you need the metal backing plate which is wrapped with the vinyl trim?
I manage to pick up an old set of LC GTR trims off ebay for $110 which still had these metal backing plate plus the stainless strips on the top of trim.
I manage to pick up an old set of LC GTR trims off ebay for $110 which still had these metal backing plate plus the stainless strips on the top of trim.
#4 _mick400_
Posted 06 May 2006 - 01:40 PM
YES THEY ARE WHAT I NEED.
HOW MUCH?
WHERE DO YOU LIVE?
THANKS
HOW MUCH?
WHERE DO YOU LIVE?
THANKS
#5 _gtr161s_
Posted 06 May 2006 - 07:19 PM
Sorry mick, these are keepers as i have 2 lc gtr's to complete.
These old trims appear on ebay fairly regulary and always go cheap because they're stuffed.
If its the metal plates that you dont see you need i know dash original in S.A. sell them for about $180 a set but the stainless finishing strips are like hens teeth, they usually go for about 250-300.
These old trims appear on ebay fairly regulary and always go cheap because they're stuffed.
If its the metal plates that you dont see you need i know dash original in S.A. sell them for about $180 a set but the stainless finishing strips are like hens teeth, they usually go for about 250-300.
#6 _mick400_
Posted 06 May 2006 - 09:10 PM
THANKS I WILL GIVE THEM A CALL.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users