Hi folks
Sorry about the repost but I am not having much luck chasing this one down.
Please see my original query below.
Thanks
Bazza
XU1 Throttle return spring - repost
Started by
Bazza
, May 05 2006 09:03 AM
7 replies to this topic
#1
Posted 05 May 2006 - 09:03 AM
#2 _gm3300_
Posted 05 May 2006 - 11:49 AM
Hi Bazza, i've been looking through the parts book to find a reference to this spring, there's listings for the 4cyl models, but i can't find any for the 6 cyls in the LJ Book.
In the LC book there is a listing for the 186X for a
SPRING-Return-2816970 (which is the one from the torsion rod to the bracket on the firewall)
but there is also a listing for the 3 return springs for the individual carbs as well
SPRING- Throttle return-7194682.
When the 2850 engine was introduced on the LC the return spring was moved from the end of the torsion rod to a bracket on the carb for the standard 6 cyl models, which carried over to LJ, so it's possible the LJ XU1 reference was omitted from the book at the time of printing.
If you have a copy of the book "Spotlight on Torana" (Marque Books) there's a pic on page 64 which shows the spring fitted.
If i find a good pic i'll scan and post it.
grant
In the LC book there is a listing for the 186X for a
SPRING-Return-2816970 (which is the one from the torsion rod to the bracket on the firewall)
but there is also a listing for the 3 return springs for the individual carbs as well
SPRING- Throttle return-7194682.
When the 2850 engine was introduced on the LC the return spring was moved from the end of the torsion rod to a bracket on the carb for the standard 6 cyl models, which carried over to LJ, so it's possible the LJ XU1 reference was omitted from the book at the time of printing.
If you have a copy of the book "Spotlight on Torana" (Marque Books) there's a pic on page 64 which shows the spring fitted.
If i find a good pic i'll scan and post it.
grant
#3
Posted 05 May 2006 - 12:16 PM
Thanks gm3300
Any help appreciated. Notice in the picture that I posted how the present spring on mine actually touches the fuel line. Even with a new spring like the one on eBay, it seems that it would still touch the fuel line. Something has to be wrong although the fittings (firewall bracket and torsion rod) seem to be correct.
Bazza
Any help appreciated. Notice in the picture that I posted how the present spring on mine actually touches the fuel line. Even with a new spring like the one on eBay, it seems that it would still touch the fuel line. Something has to be wrong although the fittings (firewall bracket and torsion rod) seem to be correct.
Bazza
#4 _dave720gtr_
Posted 05 May 2006 - 09:53 PM
The spring that you showed in your first thread bazza is the right one the guy selling it says it fits the for pot too i Q ! this ? but then i looked in the parts book
as his right ..but it dosnt show us wy yours hits the fuel line ?
for pot^^^
the lc gtr had the spring going to the battery tray with the ww2 carbi
cheers
as his right ..but it dosnt show us wy yours hits the fuel line ?
for pot^^^
the lc gtr had the spring going to the battery tray with the ww2 carbi
cheers
#5
Posted 05 May 2006 - 11:37 PM
Thanks for the pics mate - I really appreciated them.
I am sure it will work out in the fullness of time.
I am interested in the further comments from XU1 owners.
Bazza
I am sure it will work out in the fullness of time.
I am interested in the further comments from XU1 owners.
Bazza
#6 _gtr-xu1_
Posted 06 May 2006 - 12:29 PM
I think you will find the return spring and firewall bracket is on early LJ XU1s like someone has already posted in the first thread. Also early LJ XU1s have rubber fuel lines that clear the return spring as shown on page 64 (spotlight on torana LC-LJ)
pic from page 64 spotlight on torana
cheers
pic from page 64 spotlight on torana
cheers
Edited by gtr-xu1, 06 May 2006 - 12:37 PM.
#7
Posted 06 May 2006 - 02:16 PM
Thanks gtr-xu1
Mine is 10/72 so I am still none-the-wiser as to the correct setup for metal fuel lined models. Do they still use the firewall bracket or some other anchor point?
Bazza
Mine is 10/72 so I am still none-the-wiser as to the correct setup for metal fuel lined models. Do they still use the firewall bracket or some other anchor point?
Bazza
#8 _gtr-xu1_
Posted 06 May 2006 - 04:41 PM
mines 11/72 metal fuel lines NO firewall bracket. (brisbane built)
whats people with 10 month or earlier got?
whats people with 10 month or earlier got?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users