I've just put the Kingswood Country kit into my K-Frame re-build.
I got my local Pedders store to push the bushes in an their only concern was the lower control arm bushes - they like the ones that have a bevelled centre - apparently retain the rubber better but otherwise thought the kit pretty good.
I'm with UCgazman; I found the KC fellas are just really good to deal with - friendly, helpful and interested - a rare outcome in retail these days. I've used KC for a number of things now and will again no issues.
Cheers, TB
35 replies to this topic
#26
Tyre biter
-
- Members
-
- 982 posts
Forum Fixture
- Name:Craig
- Location:Canberra
- Car:Should have gone with Palais...
- Joined: 08-December 10
Posted 21 December 2011 - 11:00 AM
#27
hanra
-
- Members
-
- 10,839 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 17 February 2012 - 03:15 PM
How do peple fit the rear leg bushes in the K-Frame? Was a prick getting them out...
#28
Tyre biter
-
- Members
-
- 982 posts
Forum Fixture
- Name:Craig
- Location:Canberra
- Car:Should have gone with Palais...
- Joined: 08-December 10
Posted 17 February 2012 - 05:45 PM
Brad,
For mine they just pushed in by hand - easy-peasey.
The PITA was getting those rear legs inside the chassis rails when fitting the K-Frame.
Cheers, TB
For mine they just pushed in by hand - easy-peasey.
The PITA was getting those rear legs inside the chassis rails when fitting the K-Frame.
Cheers, TB
#29
hanra
-
- Members
-
- 10,839 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 17 February 2012 - 05:50 PM
Ah righto. Fingers crossed. I had to slice my old ones up to get them out.... I had read you can use a ratchet strap to pull the k frame legs in a few mm??
#30
_My74LH_
_My74LH_
-
- Guests
Posted 17 February 2012 - 06:31 PM
How do peple fit the rear leg bushes in the K-Frame? Was a prick getting them out...
I made up a tool .
I used it three times , once to put them in according the the parts manuel ( which was wrong ) once to remove them and once to fit them in correctly. Also made a tool to remove and fitt the control arm bushes
Edited by My74LH, 17 February 2012 - 06:33 PM.
#31
hanra
-
- Members
-
- 10,839 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 17 February 2012 - 07:09 PM
What was incorrect in the parts book?
#32
_My74LH_
_My74LH_
-
- Guests
Posted 17 February 2012 - 07:14 PM
it shows the fittment arse about, They show it fitted from the inside of the frame , this is wrong.I think the UC manuel has the update . 
Edited by My74LH, 17 February 2012 - 07:25 PM.
#33
A9X
View Garage
-
- Members
-
- 5,024 posts
A fortunate run
- Name:Welby
- Location:Perth
- Joined: 09-November 05
View Garage
Posted 17 February 2012 - 07:17 PM
what door and glass rubbers did you two end up using?
#34
_My74LH_
_My74LH_
-
- Guests
Posted 17 February 2012 - 07:23 PM
what door and glass rubbers did you two end up using?
Rare Spares kit I bought back in 06. one thing i did notice it the quality of the current rubbers is just not as good as my 06 stuff.
Edited by My74LH, 17 February 2012 - 07:27 PM.
#35
hanra
-
- Members
-
- 10,839 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 17 February 2012 - 10:20 PM
Ah yeah, Im all over the fitment of those K-Frame rubbers.. I was just gunna put em back in how they came out, which is opposite of what is shown above...
As for rubbers, I used The Rubber Shop door rubbers and Rare Spares inner/outer weather strips as they are particular to LH SL and SLR.
I was pretty happy with The Rubber Shop ones, I also gave em a hit with Rares Spares Rubber Magic spray.
As for rubbers, I used The Rubber Shop door rubbers and Rare Spares inner/outer weather strips as they are particular to LH SL and SLR.
I was pretty happy with The Rubber Shop ones, I also gave em a hit with Rares Spares Rubber Magic spray.
#36
ls2lxhatch
-
- Members
-
- 5,332 posts
- Location:Perth
- Car:LX Hatch
- Joined: 29-May 06
Posted 17 February 2012 - 11:29 PM
They fixed the error in the UC manual.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
