Hi guys had enough of blowing up bangos and 4 spd boxes just got a celica 5spd and a bell housing from dellows was wondering the best way to go got a spigot for celica to holden ??
Celica 5spd conversion from all aussie
Started by
_troy_
, Jun 07 2006 05:05 PM
5 replies to this topic
#2
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 07 June 2006 - 05:37 PM
if your talking about the bush, best to get one from dellows as they make this especially for this conversion. not sure if the holden one is the same but i wouldnt risk not calling them first.
definatly install one especially if going from auto as the rear of the crank id different to manual.
definatly install one especially if going from auto as the rear of the crank id different to manual.
#3
_troy_
_troy_
-
- Guests
Posted 07 June 2006 - 07:41 PM
Yea i have 2 bushes to suit the crank ,was wondering which speedo cable to use the celica 5spd or the m20 4 speed cable?
#4
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 07 June 2006 - 07:52 PM
they do the same for the cable, each u have will only fit one end.
#5
_Pedrobully_
_Pedrobully_
-
- Guests
Posted 09 June 2006 - 10:20 PM
Have a look at Rare Spares for the spedo cable, they do the convertion one to suit Toyota 5sp to Torana Spedo.
You could have a look at XTREME street wise clutches. www.xclutch.com.au
they did a full clutch to suit Toyota 5sp Steel to holden red 202 with clutch plate spline to suit the 5 spd, new thrust bearing, clutch pressure plate befed up and spigut bearing to suit, delivered to Darwin for under $300.
You could have a look at XTREME street wise clutches. www.xclutch.com.au
they did a full clutch to suit Toyota 5sp Steel to holden red 202 with clutch plate spline to suit the 5 spd, new thrust bearing, clutch pressure plate befed up and spigut bearing to suit, delivered to Darwin for under $300.
#6
_Oldn64_
_Oldn64_
-
- Guests
Posted 10 June 2006 - 02:57 AM
I used to make my own one it does not take too much, just start with teh holden one and fit the toyota speedo screw plate on teh end... A lighter is your secret.they do the same for the cable, each u have will only fit one end.
Cheers
PS: This is how I put a celica box in a Gazelle many moons ago.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
