Reaper Customs / HPD / Diesel Smart
#1 _Viper_
Posted 16 November 2012 - 10:19 PM
Our roots are in Panel and Paint but we have scaled down that side of the business a little to become more specialised in high quality street and show cars and only work on 1 main car at a time, we are actually booked out for quite awhile in that area and its not what Im here for today but thought it was worth a Mention.
Some of you may have seen us at the latest Perth 4WD Show. We are now the Perth Distributor for all of HPD's products (High Performance Diesels) we can supply, fit and dyno tune a variety of Turbo & Intercooler kits for Patrols, Landcruisers, Land rover, BT-50, Navara, Pathfinder and Hilux if your car is not listed contact us as our range is constantly expanding.
Full pricing and details can be found on HPD's Website:
http://hpdiesel.com.au/
We also supply and fit Supercar performance's range of products including their Diesel Smart modules.
These will fit most of the new common rail diesel cars, 2WD and 4WD, the entry level module is from $1100 fitted, it is a plug and play system connecting directly to the injectors down stream of the ecu, with around 20% increase in power and Torque.
Or for the ultimate in power and economy we offer the Super Diesel smart module which has more tuning potential, connects directly to the injectors as well as the MAP sensor for boost control, we regularly gain OVER 50% in power and Torque and up to 20% increase in fuel economy when towing. These modules are from $1810 fitted
Exhaust Gas Temps are the killer of Diesel motors, we offer a full EGT Defence package which has a probe fitted to the exhaust and gives you a incab digital display showing you real time Exhaust Gas Temperature, It has a audible and visual alarm for high temp and can also be used to trigger functions such as cooling fans or water sprays etc as well as cutting your diesel smart modules back to program 1. The kit supplied and fitted is $715
For more details on all of supercar performance's products they can be found here:
http://www.supercarperformance.com.au/
We offer before and after Dyno runs for any of the above products for $110inc as well as custom tuning for those that want to push their car even further.
Our personal website is http://www.reapercustoms.com.au altho it is currently under construction and will be changing quite alot in then near future.
If you have any questions feel free to reply to the thread, PM me directly or can phone me Clint on - 0414615477
#2
Posted 16 November 2012 - 10:26 PM
#3 _Viper_
Posted 16 November 2012 - 11:17 PM
#4
Posted 17 November 2012 - 10:35 AM
Congrats on starting up the company.
Ill keep my ear out for anyone that needs this kind of work done and send them your way.
Ill have to pop in some time as your only just round the corner from me.
Good luck with it all.
Evan.
#5 _Viper_
Posted 18 November 2012 - 06:53 PM
But yes we are hoping to move to Malaga ASAP
#6
Posted 19 November 2012 - 08:29 AM
Thanks for letting me know about the adress. would have been funny if i just rocked up there.
Ev
#7 _Viper_
Posted 29 April 2013 - 10:53 PM
Well as it turns out we did get that unit in Malaga Evan
We have been very busy moving and setting up and still working on the big project but we took a small break and got a chance to work on this beauty.
2005 Ford GT, Had been in abit of a prang, The owner sourced new panels and we did the Paintwork. Owner says its the only one in WA?
#8
Posted 06 May 2013 - 06:25 PM
Hey Clint!
Nice work on that GT, It looks sweet!
Congrats on the new unit.Looks like you have got plenty of room to work.
Evan.
#9 _Viper_
Posted 06 May 2013 - 09:30 PM
#10
Posted 07 May 2013 - 09:41 AM
how is your tuning work Clint ?
I'd like a holley sorted on the dyno .
#11
Posted 07 May 2013 - 10:13 PM
Hey Clint.
Cheers for the offer. Ill have to pop in when the Torry is up and running again.
Evan.
#12 _Viper_
Posted 03 June 2013 - 11:21 PM
Hey guys, here is a recent job we did... 1972 SS Chevelle with a 454 Big block (AFAIK Stock except for aftermarket intake, 750 holley and twin 2.5"). Owner bought the car recently and just wanted everything checked over, also supplied a new fuel tank level sender and gauge which we fitted and I quickly made up a custom mounting bracket to suit his center console. Also did a tune on the dyno... Made 225rwhp when he dropped it off, ended up with a best of 277rwhp... It sure helps when the secondaries are functioning properly.
Quick Video here:
http://s242.photobuc...4d54cd.mp4.html
Edited by Viper, 03 June 2013 - 11:23 PM.
#13
Posted 05 June 2013 - 09:08 PM
A 454 diesel?
#14 _Viper_
Posted 05 June 2013 - 10:52 PM
Haha nah, altho that would be nice... But Diesels isnt all we do.
#15 _Viper_
Posted 12 August 2013 - 12:47 PM
Hey guys, We have setup a facebook business page. check it out and like the page to see future updates/projects...
https://www.facebook...118336378198932
Here is a teaser for one of our current projects
#16
Posted 12 August 2013 - 06:24 PM
oh its ok its only a hq body
#17 _Bomber Watson_
Posted 12 August 2013 - 06:52 PM
#18 _Viper_
Posted 12 August 2013 - 07:24 PM
Check out the facebook page and you will see
Or wait abit and I might put a thread of the build in the Non torana projects.
#19
Posted 12 August 2013 - 09:11 PM
#20 _Viper_
Posted 07 October 2013 - 05:38 PM
Hey guys, we had a project that was due to come in postponed until later in the year so we have a opening for some Rust repairs... If you're in need or know someone who is, either send us some pics to [email protected] or come in for a chat (2/68 Westchester rd Malaga) can also reach me on 0414615477
Mention your from GMH-Torana.com.au
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users