Hey guys,
Im just about to fit my headers onto my engine and have been struck with a confusing situation...
Been told by a couple of exhaust shops (a couple because i didnt know if they sounded like they were B/S'n or really didnt care) that you fit gaskets...or you only fit gasket goop (cant remember product term) with silican around the outside.
4 different shops...2 different answers
Can anyone here please let me know what the PROPER method is, so as to not having any leaking/etc issues!!
Cheers people
Matt
to gasket or not to gasket!!
Started by
_Neat LX_
, Jun 25 2006 06:58 PM
3 replies to this topic
#1 _Neat LX_
Posted 25 June 2006 - 06:58 PM
#2
Posted 25 June 2006 - 07:10 PM
Matt, We use the metalised gasket + a bit of goop to get a good seal. I'm not convinced!
My honest opinion is to use the leather type gasket with a bit of exhaust goop to get the perfect seal. i think these gaskets are by far the best. Dont forget to re-torque teh bolts a few times after the heating.cooling the system to make sure theyre nice and tight
Cheers
My honest opinion is to use the leather type gasket with a bit of exhaust goop to get the perfect seal. i think these gaskets are by far the best. Dont forget to re-torque teh bolts a few times after the heating.cooling the system to make sure theyre nice and tight
Cheers
#3 _Neat LX_
Posted 25 June 2006 - 07:15 PM
Awsome thanks Tiny
#4
Posted 25 June 2006 - 07:16 PM
That's what we've been through mate, Hope it works for ya!
Cheers
Cheers
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users