Custom UC Tail lights
#26 _Keithy's_UC_
Posted 24 July 2006 - 08:32 PM
Cheers
Keith
P.S. if i do convert them i will do a write-up with plenty of piccys...
#27
Posted 24 July 2006 - 08:49 PM
#28 _Keithy's_UC_
Posted 24 July 2006 - 10:45 PM
Just a combo of number plate i'm tossing up at the moment
#29
Posted 25 July 2006 - 08:05 AM
#30
Posted 25 July 2006 - 06:31 PM
#31 _Keithy's_UC_
Posted 25 July 2006 - 06:38 PM
Keith
#32
Posted 25 July 2006 - 06:56 PM
http://www.abbeysoun...col/supra/2.jpg
they curve a fair bit so wouldn't they either stick out of the car or require some modifacation to look like they belong, or not?
#33 _Keithy's_UC_
Posted 26 July 2006 - 12:30 AM
To make the lights sit in the panel work, it may require some cutting, but to have them sit out like the UC lights would require no cutting.
Keith
Edited by Keithy's_UC, 26 July 2006 - 12:32 AM.
#34
Posted 27 July 2006 - 01:51 PM
#35 _LX_SS_
Posted 27 July 2006 - 04:11 PM
#36
Posted 27 July 2006 - 06:19 PM
Very helpful keithy.Shouldnt be too hard to adapt in my opinion. They only curve around about an inch and a half, the UC tail lights stick out about an inch... Not much difference...
To make the lights sit in the panel work, it may require some cutting, but to have them sit out like the UC lights would require no cutting.
Keith
#37 _ozstreetcar_dave_
Posted 27 July 2006 - 11:18 PM
#38 _LX_SS_
Posted 27 July 2006 - 11:35 PM
what about if you virtually made a fibreglass housing same as the uc tail shape but used these lights
i have those in 9-33 volt version, there not cheap , rrp on a full set is $750
i scored them for a bargain :-P of a whole $80 for all 4.
Edited by LX_SS, 27 July 2006 - 11:35 PM.
#39 _Aidan_
Posted 28 July 2006 - 07:01 PM
#40
Posted 28 July 2006 - 07:31 PM
Was this done before or after it was stolen? I've only seen the car burnt out...
#41 _Aidan_
#42 _Aidan_
Posted 29 July 2006 - 01:10 AM
#43 _ozstreetcar_dave_
Posted 29 July 2006 - 08:42 PM
The car actually wasn't burnt, it was covered in body deadner. It will be going to the strippers in a couple of weeks to get rid of all the shite.
Edited by ozstreetcar_dave, 29 July 2006 - 08:43 PM.
#44 _greenmachine215_
Posted 29 July 2006 - 10:22 PM
Page one thought id never see that pic again, The sky blue UC Hatch with the "SKYLINE" Type lights was one of my photoshop jobs about 2yrs ago, i see its hit another forum and been stamped
#45 _ozstreetcar_dave_
Posted 30 July 2006 - 06:42 PM
#46 _brett_32i_
Posted 30 July 2006 - 07:32 PM
good to see some real life pics.....
#47
Posted 01 September 2006 - 12:31 PM
#48 _MRNOS_
Posted 01 September 2006 - 12:38 PM
#49
Posted 01 September 2006 - 12:43 PM
#50
Posted 01 September 2006 - 01:06 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users