New LSD
Started by
_Aidan_
, Aug 29 2006 03:53 PM
8 replies to this topic
#1 _Aidan_
Posted 29 August 2006 - 03:53 PM
One of my mates have been blabbering on about needing to wear in a brand new LSD.. and a method is to do figure eights. Is there any truth behind this?
#2
Posted 29 August 2006 - 08:02 PM
Thats probably the best way to wear one out
Not wear one in
Not wear one in
#3 _Aidan_
Posted 29 August 2006 - 08:19 PM
thats what I thought. So no need to do anything to wear in it, just drive it?
#4 _MAWLER_
Posted 29 August 2006 - 08:43 PM
No officer I was not doing burnouts, I was running in my new LSD diff, honest. lolOne of my mates have been blabbering on about needing to wear in a brand new LSD.. and a method is to do figure eights. Is there any truth behind this?
#5 _rorym_
Posted 29 August 2006 - 08:45 PM
Tell him to listen less...and drive more.
R
R
#6 _Aidan_
Posted 29 August 2006 - 08:55 PM
cheers
#7
Posted 29 August 2006 - 11:24 PM
I just got my 9 inch LSD back from the diff doctor.
His recommendations are to run Castrol LSX 85W/140 for 800kms, travelling at no more than 80kph, drop the oil, refill with same oil type, then drive as per normal.
His recommendations are to run Castrol LSX 85W/140 for 800kms, travelling at no more than 80kph, drop the oil, refill with same oil type, then drive as per normal.
#8
Posted 30 August 2006 - 06:55 AM
it always amazes me how all these running in procedures come out for old reconditioned cars and bits and vary greatly to a brand new car....
#9
Posted 30 August 2006 - 08:40 AM
Run in procedure for for a new or reco LSD
1. Start engine
2. Place car in gear
3. Drive it & enjoy.
1. Start engine
2. Place car in gear
3. Drive it & enjoy.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users