Hey guys , I am looking at putting a VP or the like V6 motor into my torana after i finish painting it and i need alot of details i have looked at the V6conversions site but does anyone have any pics of them fitted and what would I need to put it in? like engine mounts etc... and i will also be running a Turbo 700 and a 9" so i need peoples advice. and also what specific things would an engineerer look at Thanks People
3.8l V6 into Torana
Started by
_caseyo69_
, Sep 30 2006 09:55 PM
6 replies to this topic
#1 _caseyo69_
Posted 30 September 2006 - 09:55 PM
#2
Posted 30 September 2006 - 09:59 PM
besides suggesting to buy a kit and a wreck (donor car and use its diff aswell instead of 9") i cant help you but i will suggest fitting before you paint.
Edited by ALX76, 30 September 2006 - 10:00 PM.
#3 _caseyo69_
Posted 30 September 2006 - 10:22 PM
Thanks ALX76 i will be painting before i do the driveline so i will just need to be morecareful and not fumble it in there crashing into things
#4
Posted 01 October 2006 - 01:51 AM
blankets help with that.
#5 _nunganunga_
Posted 01 October 2006 - 07:32 PM
What model torana?
#6 _vngmh_
Posted 01 October 2006 - 09:40 PM
Why do you wanna use a 9", the v6 isnt going to make any where the power or torque that would warrent a 9", a cut down borg warner would be a lot lighter, and take all the abuse from the 6 all day, not to mention cheaper, unless you already have one ready to go in.
Theres no real need to buy a wreck, you can get running vn's for under 1K minus rego, so rip the engine, trans, loom, diff everythin out and then burn the shell.....and video it so everyone can watch later.
Theres no real need to buy a wreck, you can get running vn's for under 1K minus rego, so rip the engine, trans, loom, diff everythin out and then burn the shell.....and video it so everyone can watch later.
#7 _caseyo69_
Posted 02 October 2006 - 12:01 PM
what model torana
LX
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users