I put a thread up like this once before, but I cant seem to find it so I will start again...I found a good rubber bung to fill the chassis rail holes in the engine bay (next to your cylinder heads)
here is a look at them fitted...
now .... I have double checked my info... I went back to my old Holden Dealership today and went and spoke to there Pre Delivery Tech AGAIN !! and yes these 50mm bungs are off a VY or VZ Commodre Ute...they are discarded when ever a genuine towbar and wiring is fitted...the new wiring kit comes with the wiring going through the new bung....the bungs are located on a vertical panel directly above where a towbar would normally be fitted (underneath the car)...to prove it I picked up another one (I now have 5, 1 spare) and asked him to save them for me...free of course... so If you see me with my torana, I may have some to give away!!
Here is the part no and reatail price !!
Holden 92040558 $2.80 each.
Edited by enderwigginau, 20 February 2006 - 01:24 PM.