Diff Ratio
#1 _crumpledoor_
Posted 05 October 2006 - 10:27 AM
cause it revs much the same as my old tori. Would I be better off running a 3.08 diff?
A couple of my mate have had them in the past and they seem to get good take off and good crusin rev ranges. My car currently revs out way too fast and revs too high just doing 90k/hr.
#2
Posted 05 October 2006 - 11:52 AM
just curious, what does your car sit on at 100km/h? what size wheels and tyre do you have on the back?
#3 _Sammy_
Posted 05 October 2006 - 01:14 PM
#4 _crumpledoor_
Posted 05 October 2006 - 02:29 PM
3.08 is the go i reckon. just gotta find one.
#5
Posted 05 October 2006 - 03:12 PM
I have to go the other way, I am at 3.08 going to 3.55, I get 100km/h in first with a trimatic at the moment, so I need the lower gears....
#6 _JBird_
Posted 05 October 2006 - 04:19 PM
#7
Posted 05 October 2006 - 04:21 PM
#8 _Sammy_
Posted 06 October 2006 - 02:47 PM
#9
Posted 06 October 2006 - 03:13 PM
#10
Posted 06 October 2006 - 03:51 PM
#11 _Sammy_
Posted 09 October 2006 - 02:04 PM
that depends if you break those gears or not^or you could just get a 3.08 course spline and use fine spline side gears, makes them easier to find then.......
99% of the blown diff's i've had see those gears in pieces!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users