Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

LX project

Started by _LS1 Taxi_ , Feb 26 2013 05:15 PM

«
Prev

Next

Please log in to reply

469 replies to this topic

#426 _LS1 Taxi_

Guests

Posted 05 December 2015 - 07:34 AM

Yeah 60ft was 1.75

Running MT ET streets on the back but they are 225/50r15 so not at all a tall tyre. I picked them because my gears are 3.5s so I wanted to up the revs.

I think with taller tyres, shorter gears it would easily do 11.

I had a lot of fun anyway and that's what it's all about (to me anyway).

Back to top

#427 _LS1 Taxi_

Guests

Posted 05 December 2015 - 07:37 AM

HAha still 12 ,s after all that extra power and convertor , I'm doing another engine as we speak . If I don't run a 11 I would be shattered looking at 480-500 hp

I don't recall seeing your car at the drags?
Has it posted a time yet?

Back to top

#428 _parsons5000_

Guests

Posted 05 December 2015 - 08:10 AM

throw some 3.7 in the bum and run some 235/60/15 street radials ....

Back to top

#429 LXCHEV

Lotsa Posts!

Members
3,510 posts

Name:Brett
Location:Melbourne
Car:'76 LX - 383 Chev
Joined: 08-November 05

Posted 05 December 2015 - 09:59 AM

Well done mate, great time. And like the others have said, that MPH is good for 11's already if you keep chasing. A nice cold crisp night at Calder Park would see you there.

Back to top

#430 _LS2 Hatch_

Guests

Posted 05 December 2015 - 02:20 PM

I don't recall seeing your car at the drags?
Has it posted a time yet?

Still trying to run it in!
Only done 1100km's so far!!!!

Back to top

#431 SmacT

Forum Fixture

Members
907 posts

Name:Sam
Location:Sydney
Car:LX 4dr 383, TKX, BW
Joined: 24-December 08

Posted 05 December 2015 - 09:02 PM

12.2 for a street car - sounds pretty quick to me! It's not for sheep stations anyway, it's for fun and satisfaction. Sounds like you won there. Great car this one, good job.

Back to top

#432 LS1LX

Forum Fixture

Members
1,931 posts

Location:Sydney
Joined: 22-November 05

Posted 05 December 2015 - 11:00 PM

1.7 60ft
Not bad really

Good 60ft and mph, something isn't adding up right. It can't be wheel spin.
Are you shifting gears to late?

Edited by LS1LX, 05 December 2015 - 11:01 PM.

Back to top

#433 _LS1 Taxi_

Guests

Posted 08 October 2016 - 03:59 PM

Time for an update.

I'm semi over racing as I'm not prepared to lose functionality as a street car/cruiser to get into the 11s so it's time to improve the cruising experience.

Seeing as it gets so hot in Canberra (lol) and I'll be driving 16hrs return trip to the nationals in a month I've decided to add AC to the taxi. Have been plugging away on it for the last week or so after collecting parts and figuring out how I wanted to do it.

I wasn't totally happy with the dash and how I'd mounted the gauges so decided to fix all this up at the same time.

First thing to do was pull it all apart and figure out how I was going to mount everything. Early on the decision was made to dump the Torana heater box, cables, switch, fan assembly and fit a vintage air underdash heat/cool unit.

This is the vintage air unit.

Engine bay with old fan assembly before

The new vintage air control panel which I'll integrate into a panel housing the gauges.

Started working on a prototype for the switch panel.

2nd effort painted satin black

Mounted gauges and switch panel. Also redid all the wiring at the same time so now everything behind the dash is plug and play. Much neater and easier to add/remove/diagnose.

Deleted the Torana ashtray and added a double vent instead.

Plugged off all the fresh air vents leading into the cabin from the plenum. The 2 side vents will be plumbed to the vintage air unit also. Deleted the fan assembly and made up some alloy panels to fill the void and mount the manifold for the heater/AC lines.

Made up some brackets and mounted up the condenser and remounted the trans cooler. Happy it all fits behind the grill without mods.

Made up a panel for the AC relays and fusible link. This will go up under the dash on the passenger footwell wall.

Used the factory commo LS compressor mount and modified it to clear the tuff mounts. Fitted up the compressor and it all just clears the control arm and engine mount.

So that's where I'm up to.
I'm hoping to have it finished by the end of next week as I'm doing it in between other stuff and at night.

Sent from my iPhone using Tapatalk

Back to top

#434 LXCHEV

Lotsa Posts!

Members
3,510 posts

Name:Brett
Location:Melbourne
Car:'76 LX - 383 Chev
Joined: 08-November 05

Posted 08 October 2016 - 09:15 PM

Sweet!

Back to top

#435 _LHSL308_

Guests

Posted 08 October 2016 - 10:22 PM

What, no tribulations about removing the old heater box :lol:

Back to top

#436 _LS1 Taxi_

Guests

Posted 08 October 2016 - 10:42 PM

What, no tribulations about removing the old heater box

Haha. Shit job with the LS in situ.
Lucky you were there to help!

Back to top

#437 neglectedtorana

Forum Fixture

Members
967 posts

Name:Tom
Location:Central Coast
Car:LX Torana Sunbird
Joined: 06-March 12

Posted 09 October 2016 - 07:03 AM

Nice work Darren, will make longer trips more comfortable. Your car is good inspiration for me as it is not just well built and fast but also practical and I think I can achieve a similar finish (one day)

Where did you but the buts from?
Did you buy local or order from the States?

Woohoo

Back to top

#438 _LS1 Taxi_

Guests

Posted 09 October 2016 - 12:43 PM

Thanks Tom.
Nice words indeed.
All bits sourced locally. The exchange rate has taken the value out of Summit and other US suppliers

Back to top

#439 SmacT

Forum Fixture

Members
907 posts

Name:Sam
Location:Sydney
Car:LX 4dr 383, TKX, BW
Joined: 24-December 08

Posted 09 October 2016 - 12:52 PM

Love this build. I've been tossing up air con for ages, I think you have tipped me over. Which vintage air unit did you choose? It's confusing as there are so many.

Back to top

#440 _LS1 Taxi_

Guests

Posted 09 October 2016 - 04:22 PM

It's the gen II compac version.....

This one.
http://pages.ebay.co...lobalID=EBAY-AU

Fits up under the dash and clears the PCM which I have mounted on the tunnel nicely.

If I had my time over i would've done this as part of the initial build and it could be so much sweeter. Unfortunately I'm not prepared to cut open the upper plenum at this point to do it how I'd want to....but the next build will definitely have it all integrated.

Back to top

#441 SmacT

Forum Fixture

Members
907 posts

Name:Sam
Location:Sydney
Car:LX 4dr 383, TKX, BW
Joined: 24-December 08

Posted 09 October 2016 - 09:13 PM

Excellent - thanks. And yes, me adding air con now is better than trying to do it when it's finished. Bette rout some thought into it. That and my power windows...

Back to top

#442 Heath

I like cars.

Administrators
18,314 posts

Name:Heath
Location:Eastern Suburbs, Melbourne
Car:Heavily Modified UC Sunbird Hatchback
Joined: 07-November 05

View Garage

Posted 10 October 2016 - 11:58 AM

Nice work Daz.

Back to top

#443 _LS1 Taxi_

Guests

Posted 15 October 2016 - 08:04 AM

Finished the underdash connections and mounted up the HVAC unit and started running the ducting.

Modified a 4 way manifold and split it into two then drilled and mounted it on the inner guard for the heater and AC lines. These will be concealed in the inner guards to route to the drivers side where the water pump outlets and AC compressor are.

Mounted up a few of the lines to check how it'll look.

Fitted up the new control and gauge piece. Plugged it in and finalised the wiring.

Have had to run a 2nd relay to control the fans to cool the condenser. The LS PCM triggers the relay with an switched earth....the vintage air unit sends a 12v signal to the trinary switch which then sends 12v to the compressor and fan relay. This forced a 2nd relay run in parallel to trigger the fans.

Have a few more lines to run and mount, then it'll be time to gas it and start testing...

Beer time

Sent from my iPhone using Tapatalk

Edited by LS1 Taxi, 15 October 2016 - 08:06 AM.

Back to top

#444 _LHSL308_

Guests

Posted 15 October 2016 - 09:16 AM

Looking good Daz. The Vette and your Torrie will be ready for summer cruisin up to Heathcote

Got the roady for the Torrie mate. And the Monaro sold a few days ago. It will be going in for a roady on Monday. Hopefully I don't get smashed!

Back to top

#445 _LS1 Hatch_

Guests

Posted 15 October 2016 - 10:30 AM

Air con is a great addition...I'm sure glad I did it on the first go around myself.

Back to top

#446 _LS1 Taxi_

Guests

Posted 15 October 2016 - 12:26 PM

Looking good Daz. The Vette and your Torrie will be ready for summer cruisin up to Heathcote

Got the roady for the Torrie mate. And the Monaro sold a few days ago. It will be going in for a roady on Monday. Hopefully I don't get smashed!

That is great news dude. You sure do turn over your cars!

Air con is a great addition...I'm sure glad I did it on the first go around myself.

Yes, I regret not planning it prior to the initial build. I would've deleted the majority of the plenum and all the fresh air vents to integrate it into the car much smarter.

The next car will be better!

Back to top

#447 _LHSL308_

Guests

Posted 15 October 2016 - 12:47 PM

That is great news dude. You sure do turn over your cars!

Yes, I regret not planning it prior to the initial build. I would've deleted the majority of the plenum and all the fresh air vents to integrate it into the car much smarter.

The next car will be better!

4 seats doesn't go into 5 people so had to let it go. Put a deposit on another car this morning. Exactly the same colour VZ SS auto one owner.

Edited by LHSL308, 15 October 2016 - 12:47 PM.