_outer control_
Posted 28 August 2014 - 09:59 PM
L34 are 14.75" Wayne, but if they use the same p/n as 6cyl LH (which they do) it musn't be that one as those aren't bent on the ends apparantly.
Thats right Byron thats the size unless a Qld car and some cars up there had bigger ones fitted but all genuine original L34 fans that i can verify as original are all the same but are different to 6 banger fans
_outer control_
Posted 28 August 2014 - 10:03 PM
I picked up 4 NOS 6 banger fans 5 years ago at a swap meet in Perth and they are different to the L34 fans that i have seen even if they are the same part no
_macdou_
Posted 29 August 2014 - 02:55 PM
Which fan blade do you want to do the '73 cutouts to?
Scrivet Counter
Posted 29 August 2014 - 03:54 PM
Best to use the 15.5" LJ fan.
_macdou_
Posted 29 August 2014 - 07:04 PM
_SableMet7/73_
Posted 30 August 2014 - 02:13 PM
Hi, would like to find out if my fan is original for my late July 73 XU1 or something else
thats been swapped out & long gone.
Sorry cant do pics atm
Mine looks like the top 1 in Ken's first pic..
rounded flat blade
tad over 14.75"...(14 13/16ths)
no stenciling to be seen
has only the number "8" stamped into each blade near where they cross & are rivetted.
any help appreciated
Jono
CABIN ENGINE CONTROLS GALORE
Posted 30 August 2014 - 03:38 PM
Mine is saved from the rust now,
thank's to this thread:-
Torana straight Fan Blade is 15.4 inches, tip to tip ( 391mm ),
2 1/8" water pump PCD ( 54mm ), and no cut-outs:-
WP_000097.jpg 70.41K
1 downloads
WP_000096.jpg 39.86K
1 downloads
WP_000090.jpg 45.44K
1 downloads
WP_000091.jpg 67.81K
1 downloads
and I cannot find any number stamped near the rivets hey.
CABIN ENGINE CONTROLS GALORE
_macdou_
Posted 31 August 2014 - 07:40 AM
Best to use the 15.5" LJ fan.
0 members, 0 guests, 0 anonymous users
