In need of Speedometer solution
#26
Posted 02 August 2015 - 06:12 PM
I watched him do the VATS didn't look to complex, he is a tuner himself.
Ill have a look at VSS and a general look around.
#27
Posted 02 August 2015 - 06:16 PM
#28
Posted 02 August 2015 - 07:24 PM
#29
Posted 02 August 2015 - 07:55 PM
Do you have an OBDII adapter?
If so, does any of the software show a virtual dashboard to confirm the ECU is seeing a VSS signal?
#30
Posted 02 August 2015 - 08:08 PM
Do you have an OBDII adapter?
If so, does any of the software show a virtual dashboard to confirm the ECU is seeing a VSS signal?
Edited by Bart, 02 August 2015 - 08:10 PM.
#31
Posted 02 August 2015 - 08:19 PM
Could this screw the gear change or is this mainly for P R N D selection?
#32
Posted 02 August 2015 - 08:56 PM
No I don't have any adapter. Is that a comms cable that splices into the loom?
No, you should have transplanted the OBDII connector with the LS wiring loom, it's a system diagnostic point that's supposed to be located within reach from the driver's seat and looks something like this...
4360443_orig.jpg 21.94K 0 downloads
Then you can buy adapters to plug into that port and a laptop/touchscreen/smartphone/etc., there are literally thousands of them on eBay, this is just the first one I found (I'm not making any recommendations as most of these are cheap Chinese knock-offs)...
... but you can buy them for like twenty bucks and some of the software is free, including some that displays a virtual dashboard with all kinds of nifty stuff...
#33
Posted 02 August 2015 - 09:32 PM
Ok so far I have found out that I need 12v on one of the wires in my loom for gearbox, Pink with Blue trace. Now I found this wire and it is not connected to 12v. Ill confirm soon and get back to you.
Edited by Bart, 02 August 2015 - 09:32 PM.
#34
Posted 03 August 2015 - 09:03 PM
All good
Thanks guys I will confirm 100% this weekend when I drive it up the street again
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users