
CHOPPER's Drag Only UC
#1
_CHOPPER_
Posted 11 January 2006 - 07:58 PM
Oct 7, 2003:
11.25 AM: Swampy advertises his car in Swap Meet.
11.48 AM: Oldn64 confirms his availability for towing.
12.12 PM: Car sold!
10.30 PM: Car parked in my carport.
As I had bought an EFI VK for $200 in August 2003, the simple plan was to slot the EFI donk into the UC and register it. Very simple, very straight forward.
Famous last words...
UCWEPN also advertised his UC here and that also is now in my driveway. This is the one that will be registered, subject to a good report from the RWC tester. The ex-Swampy UC is currently being stripped down to a bare shell in my 4 car garage. This is whilst running a business, raising two kids on my own and trying to get the other UC registered. Should I also mention I'm looking for a third work van? Maybe not. There has been no progress of late, mainly because somebody went through a stop sign on March 18, 2005. I still haven't fully recovered from the injuries, but I am better. So in the mean time, I'm doing another clean out in the garage. Time and weather permitting, photos will be available for viewing online this weekend. Not of me, the cars.
#2
Posted 11 January 2006 - 08:07 PM
#3
_CHOPPER_
Posted 11 January 2006 - 08:12 PM

#4
Posted 11 January 2006 - 08:23 PM
#5
_Oldn64_
Posted 11 January 2006 - 08:24 PM
Cheers
#6
_CHOPPER_
Posted 11 January 2006 - 08:26 PM
4 of the 8 doors are off at the moment. Roof isn't going anywhere.you need to cut door and roof off, if going racing with red motor in a UC, lots of weight for the old 202. Chopper, do you have 2 hatches or two 4doors UC's
#7
Posted 12 January 2006 - 07:36 AM
#8
Posted 12 January 2006 - 10:35 AM

#9
Posted 12 January 2006 - 11:10 AM

#10
_[BOTTLEDUP]_
Posted 12 January 2006 - 12:04 PM

I second Peter UC's comment I'd have a UC over an LH/LX any day of the week. Better dash, better handbrake, better suspension and better value.

#11
Posted 12 January 2006 - 12:48 PM
#12
_CHOPPER_
Posted 12 January 2006 - 05:11 PM
I read that and I think it was a load of bullshit. The other thing is it still needs to be ANDRA legal.I think on the old forum there was a guide on how to get your mums car down to 12 Seconds! they pretty much hacked absolutely everything out of it! so really all that was left was motor and something that may resemble a floor for the driver to sit on, ill try and find a link, it was a great read!
#13
_Aidan_
Posted 12 January 2006 - 05:48 PM

#14
_TORANASS_
Posted 12 January 2006 - 07:06 PM
As to this thread Id say go for it Chopper, A UC would make an excellent drag car if lightend up and fitted with some decent HP. Is it gona be a N/A 202 or are you gona use some Forced Induction..A toyota blower wouldnt be too hard to setup and cheap at the same time, with the EFI it shouldnt be too big a drama to plum up and all you would need to do is remap the ECU for the extra boost. Good luck with it ..
Just My opinion tho
John
Edited by TORANASS, 12 January 2006 - 07:11 PM.
#15
Posted 12 January 2006 - 09:43 PM
#16
_CHOPPER_
Posted 12 January 2006 - 10:22 PM
* Looking for a matching pair for the front. Minimum 13" diameter, maximum 6" wide.
#17
_TORANASS_
Posted 12 January 2006 - 10:43 PM
Make me an offer as i dont wana seperate them. I think the tyres are cactus so just the rims.
John
#18
Posted 13 January 2006 - 01:44 AM
RACV MAN
#19
_TORANASS_
Posted 13 January 2006 - 02:01 AM
LX forever....
John
#20
_dansedgli_
Posted 13 January 2006 - 06:33 AM
Are you going to stick with the 202? What times do you plan to run?
Those ET streets are absolutely awesome btw good choice! I was running 1.6s 60' footers all day long on them on my AU falcon.
#21
_Yella SLuR_
Posted 13 January 2006 - 11:22 AM
#22
Posted 13 January 2006 - 11:40 AM
thats not the one off eBay aye?i have a full set of 14x7 mags like the ones you have. I picked them up today on a Gpack in bendigo. the Gpack has some rust in the boot floor otherwise its ok, if i restore the car ill be running the 13" rims with hubcaps like original.
Make me an offer as i dont wana seperate them. I think the tyres are cactus so just the rims.
John
(i think your addicted)
#23
_TORANASS_
Posted 13 January 2006 - 12:36 PM
Yep anyone know of any cure for the ebay addiction. Why is it i find myself driving half way accross the country to buy things i dont realy need...lol...
John
#24
_CHOPPER_
Posted 13 January 2006 - 06:11 PM
CHOPPER said:i have a full set of 14x7 mags like the ones you have. I picked them up today on a Gpack in bendigo. the Gpack has some rust in the boot floor otherwise its ok, if i restore the car ill be running the 13" rims with hubcaps like original.
Make me an offer as i dont wana seperate them. I think the tyres are cactus so just the rims.
John
Looking for a matching pair for the front. Minimum 13" diameter, maximum 6" wide.
Yours are 1" too wide.
#25
_CHOPPER_
Posted 13 January 2006 - 06:13 PM
CHOPPER said:What do you plan to do with it engine wise?
I have a complete and running VK EFI 3.3 in the garage with the computer etc. At this point in time, that's the engine going in.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users