Dunno yet, only ridden it around the back yard, and i couldent get higher than second gear, or above 2000rpm lol. Only four cogs and 12,000rpm left to explore once it has a plate on the back
Bombers side project
Started by
_Bomber Watson_
, Nov 17 2007 04:50 PM
32 replies to this topic
#26 _Bomber Watson_
Posted 16 December 2007 - 09:15 PM
#27 _rorym_
Posted 16 December 2007 - 10:01 PM
Looks good Mate..Only made Rocky for a day....zoomed in and out...we will catch up.
R
R
#28 _Bomber Watson_
Posted 16 December 2007 - 10:05 PM
i'll be in Bundy over the Aussie Day long weekend for my moms wedding...Will probably be taking the bike. Was thinking about going a bit further one of the days and dropping into Mary...We will see.
#29 _Bomber Watson_
Posted 18 December 2007 - 06:21 PM
Ok, for the three people following along, i have but one comment.
ITS REGISTERED!!!!
ITS REGISTERED!!!!
#30 _gstar_
Posted 18 December 2007 - 06:43 PM
lets see the next lot of pics on a track
#31 _Bomber Watson_
Posted 18 December 2007 - 07:36 PM
No track around here :(
Just took it for its maiden voyage.
All i can say is HOLY f*ck!
Ok ok ok i know all you big bike guys will be saying meh its only a 600, but i repeat, HOLY f*ck!!!
Fastest bike i have ridden so far is my GPX 250, so you can probably understand my statement.
Only held it pined once. I did a u bolt on the highway through a access lane, and there were no cars coming or going, so i pulled out, waited till i straitened up and ripped the throttle.
First gear was a blur. All i can remember is going really fast, being really scared, sub consciously leaning down till i was nearly hugging the fuel tank and realizing i have to change gears...
Second was awesome, i realized what was happening, still didnt relax any though, still hugging the fuel tank. Then i realized i had to change gears again.
Grabbed third, held it for less than a second then looked down at the gauges. I couldent actually read them, so i took note of where the needle was.
When i had slowed down to 100 again, i looked back at where the needles were. The tacho first, it was on 8000rpm. The speedo next, 170km/h. Woot, thats the fastest i have ever been in anything. And considering the strait stretch i did this on was only about 600m long, and i was back down to the speed limit by the end of it, thats not to damb bad for a first go at hitting some highs.
Im in love
Just took it for its maiden voyage.
All i can say is HOLY f*ck!
Ok ok ok i know all you big bike guys will be saying meh its only a 600, but i repeat, HOLY f*ck!!!
Fastest bike i have ridden so far is my GPX 250, so you can probably understand my statement.
Only held it pined once. I did a u bolt on the highway through a access lane, and there were no cars coming or going, so i pulled out, waited till i straitened up and ripped the throttle.
First gear was a blur. All i can remember is going really fast, being really scared, sub consciously leaning down till i was nearly hugging the fuel tank and realizing i have to change gears...
Second was awesome, i realized what was happening, still didnt relax any though, still hugging the fuel tank. Then i realized i had to change gears again.
Grabbed third, held it for less than a second then looked down at the gauges. I couldent actually read them, so i took note of where the needle was.
When i had slowed down to 100 again, i looked back at where the needles were. The tacho first, it was on 8000rpm. The speedo next, 170km/h. Woot, thats the fastest i have ever been in anything. And considering the strait stretch i did this on was only about 600m long, and i was back down to the speed limit by the end of it, thats not to damb bad for a first go at hitting some highs.
Im in love
#32 _rorym_
Posted 18 December 2007 - 08:10 PM
TOUCH"E!! Take it easy until you get used to it...I dont want to do any trips to Rocky that I dont have to...if you get my drift.
R
R
R
R
Edited by rorym, 18 December 2007 - 08:12 PM.
#33 _Bomber Watson_
Posted 18 December 2007 - 09:52 PM
Haha, yes, i got a bit of a shock R.
Will be going a bit gentler from now on, still nice to know it does go ok though...
Will be going a bit gentler from now on, still nice to know it does go ok though...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users