Spark plug gap setting
#51
Posted 27 June 2008 - 07:51 PM
Did you fit the electronic dissy after Terry looked at it?
It sounds like the dissy might have just moved on it's own, like a loose clamp?
With the pinging, that tells me it is too far advanced and the timing needs re-setting.
Worse case is your plastic gear has allowed it to jump a tooth or 2.
#52 _Chriskoss-79uc_
Posted 27 June 2008 - 10:41 PM
Yeah the nrma guy said the tooth could of jumped a cog or 2 aswell. I took the cog out and its stripped off one little tooth. Best to get a new cog and re-fit? I odnt have to set timign and all that again right mate? Just line up the timing marks and put the dissy in at the timing marks?
cheers
#53
Posted 27 June 2008 - 10:47 PM
That way you will get an idea where it goes back. Take note of where the rotor button is pointing. It may still not be right, though maybe enough to get it running. It will need to be timed with a timing light after.
The plastic gear is available from Bursons or the one off you old points dissy is the same part.
#54
Posted 27 June 2008 - 11:47 PM
#55 _Chriskoss-79uc_
Posted 28 June 2008 - 10:27 AM
#56
Posted 28 June 2008 - 04:44 PM
#57 _Chriskoss-79uc_
Posted 29 June 2008 - 10:42 PM
#58
Posted 29 June 2008 - 10:50 PM
#59 _Chriskoss-79uc_
Posted 30 June 2008 - 05:28 PM
#60
Posted 30 June 2008 - 06:28 PM
#61 _Chriskoss-79uc_
Posted 30 June 2008 - 06:34 PM
No worries mate, I'll put the new one on and try get it running.^ booked solid ATM, but get that cog sorted and let me know how ur traveling.
Not too desperate atm anyways, cheers mate
#62 _Chriskoss-79uc_
Posted 08 July 2008 - 01:29 PM
cheers mate
#63
Posted 08 July 2008 - 10:12 PM
Maybe the 11th after 2pm or the 15th after 6pm if that suites, let me know and make sure you remind me o.k.Hey Terry let me know when you can come around, called up every hiring store in Syd, nobody seems to have a friggen' timing light to hire! Peddy money and brews for your troubles (again),
cheers mate
Edited by ALX76, 08 July 2008 - 10:15 PM.
#64 _Chriskoss-79uc_
Posted 09 July 2008 - 01:34 AM
Cheers
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users