Project: MKII Cortina
#76
Posted 12 August 2011 - 07:46 PM
#77 _77hatch_
Posted 12 August 2011 - 09:46 PM
I quickly tested out a few of the dies, so easy to use .
#78 _jabba_
Posted 13 August 2011 - 11:48 PM
Ignore the crease, i ran it though the bead roller after i made it
#79
Posted 14 August 2011 - 08:16 AM
#80 _jabba_
Posted 14 August 2011 - 12:01 PM
Well i just made my first attempt at a floor pan, pretty happy with the results and it was so quick and easy to do! The floor is a little oil canny after bead rolling but other than that I'm very pleased! Maybe dirtbag has some tips .
That piece sits between the transmission tunnel and the rhs chassis rail rear.
#81 _mick74lh_
Posted 14 August 2011 - 12:57 PM
#82 _nzstato_
Posted 14 August 2011 - 04:24 PM
Also have a look at www.metalmeet.com you will find lots of ideas and tips
#83 _jabba_
Posted 14 August 2011 - 05:57 PM
I had a second attempt at making the floor pan, this time i made both sides in an effort to keep it symmetrical. Its better than the first attempt but still not 100%. Getting better tho!
Its only just sitting there atm, still it doesn't fit too badly .
#84 _jabba_
Posted 15 August 2011 - 09:54 PM
Edited by jabba, 15 August 2011 - 09:54 PM.
#85 _77hatch_
Posted 15 August 2011 - 09:58 PM
looks like a real nifty bit of gear !
Neil hadn't had a play so we thought a cartoon piston would be a good place to start .
#86 _jabba_
Posted 15 August 2011 - 10:01 PM
#87 _77hatch_
Posted 16 August 2011 - 08:58 PM
I heard then saw you drive past, i was in the shed out the back . I was waiting for you to do a U-turn at the end of the street but you went out for a cruise . Pop round, ill customise your bonnet scoop .
#88 _mick74lh_
Posted 16 August 2011 - 11:17 PM
#89
Posted 16 August 2011 - 11:42 PM
Said the barmaid to the bishop?What a cool tool!
#90 _jabba_
Posted 20 August 2011 - 08:59 PM
#91 _77hatch_
Posted 20 August 2011 - 11:00 PM
[quote name='jabba' timestamp='1313837963' post='615073']
Finally some more progress! We have finished welding in the rest of the outer sill, welded one of the chassis rails in and fitted the first piece of floor!
#92 _jabba_
Posted 21 August 2011 - 04:08 PM
#93 _jabba_
Posted 21 August 2011 - 09:22 PM
Neil is going to buy the megasquirt for the rustina if the discount gets high enough
#94 _jabba_
Posted 22 August 2011 - 09:24 PM
#95 _jabba_
Posted 27 August 2011 - 07:13 PM
#96
Posted 28 August 2011 - 10:22 AM
#97 _jabba_
Posted 04 September 2011 - 03:10 PM
#98 _jabba_
Posted 18 March 2012 - 07:45 PM
This weekend we blasted the floor and sealed it with etch primer to stop the stupid surface rust once and for all
Blasted
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users