Anyone got a pic of a genuine Holden LJ GTR and LH SLR 5000 wheel nut? I could be wrong but I'm sure the annular grooves are different to the American nuts.
gtr 10/72 brisbane car- need info please
Started by
_Agent 34_
, May 23 2011 05:15 PM
92 replies to this topic
#76
S pack
-
- Members
-
- 15,541 posts
Scrivet Counter
- Name:Dave
- Location:Luggage Point
- Car:73 LJ
- Joined: 25-January 10
Posted 25 April 2013 - 09:53 PM
#77
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 25 April 2013 - 10:03 PM
Hey Dave,
You are correct they are a bit different,but once on fitted on the car,will be hard to tell from a distance,they are the same height as per gtr wheel nut.
Regards John.
#78
S pack
-
- Members
-
- 15,541 posts
Scrivet Counter
- Name:Dave
- Location:Luggage Point
- Car:73 LJ
- Joined: 25-January 10
Posted 25 April 2013 - 10:21 PM
HI John
My main concern is the shallow grooves in the American nuts may not hold the GTR centre cap tightly.
Cheers
Dave.
#79
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 25 April 2013 - 10:35 PM
Hey Dave,
I have a genuine wheel nut in my hands now,the bottom groove is the same as the pontiac in the photo,but the top groove is different.The tapper on my wheel nut is the same as the pontiac one on the bottom to the rim...
Regards John.
#80
hanra
-
- Members
-
- 10,839 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 25 April 2013 - 10:43 PM
Edited by hanra, 25 April 2013 - 10:44 PM.
#81
S pack
-
- Members
-
- 15,541 posts
Scrivet Counter
- Name:Dave
- Location:Luggage Point
- Car:73 LJ
- Joined: 25-January 10
Posted 25 April 2013 - 11:38 PM
Right on Brad, that's how I remember the LJ GTR wheel nuts looked.
The grooves in the original nuts appear to be slightly deeper but hard to tell for sure from a photo.
#82
grumpy xu1
-
- Members
-
- 2,809 posts
Lotsa Posts!
- Name:Gary
- Location:Queensland
- Car:lj xu1
- Joined: 01-February 10
Posted 28 April 2013 - 09:18 PM
Hi guys, you could simply get the verniers
out & measure the circumference of the
groves diameter length ect. Compare them
& then we'd all know & could make an
easy decision on where to purchase ect.
would certainly help me & a few others,
Gary.
#83
_Agent 34_
_Agent 34_
-
- Guests
Posted 12 May 2013 - 09:21 AM
guys,
can we have some measurements on the following GTR badge position on the boot.
one person has so far provided 535mm to the top of the badge ( measured off the top edge of the boot near the screen) and 70mm in to the R on drivers side.
Just does not seem right. - seems to close to the edged,
anyone have an original non restored car to measure off please.
thanks
#84
_Agent 34_
_Agent 34_
-
- Guests
Posted 08 August 2013 - 07:34 PM
did these shit box gtr's come out with twin blurting horn 's
#85
S pack
-
- Members
-
- 15,541 posts
Scrivet Counter
- Name:Dave
- Location:Luggage Point
- Car:73 LJ
- Joined: 25-January 10
Posted 08 August 2013 - 07:44 PM
Yep.
#86
_Agent 34_
_Agent 34_
-
- Guests
Posted 08 August 2013 - 07:52 PM
don't tell me they were a "high note low note " .
Ok so how do you tell the bloody difference between a yodelling high note and low note
I've got a few here, only one that works and it's a metal one ?
not tested the other ones though
thanks dave you have deflated me again and my dreams to have a harry firth, peter brock prototype , first gtr, part LC gtr torana !
although by the time i'm finished it will be close LOL
#89
S pack
-
- Members
-
- 15,541 posts
Scrivet Counter
- Name:Dave
- Location:Luggage Point
- Car:73 LJ
- Joined: 25-January 10
Posted 08 August 2013 - 08:37 PM
don't tell me they were a "high note low note " .
Ok so how do you tell the bloody difference between a yodelling high note and low note
Ya'll have to ask Julie Andrews that one I suspect. 
Aftermarket air horns. F&$ked if I know how you're supposed to fit them in the engine bay though.
Edited by S pack, 08 August 2013 - 08:39 PM.
#90
_Agent 34_
_Agent 34_
-
- Guests
Posted 07 September 2013 - 07:25 AM
anyone got a photo of the correct grill GTR badge position,.
thanks
#91
S pack
-
- Members
-
- 15,541 posts
Scrivet Counter
- Name:Dave
- Location:Luggage Point
- Car:73 LJ
- Joined: 25-January 10
Posted 07 September 2013 - 08:19 AM
http://www.carpoint....AD-2329929&Cr=5
Grant, see the pic of the GTR grille badge on this car. Grille centre horizontal bar but needs to be moved one vertical bar closer to the passenger headlight.
#92
_Agent 34_
_Agent 34_
-
- Guests
Posted 10 September 2013 - 09:23 PM
SOS glove box - steel insert that is attached to the side of the car board insert .
guys , missing this piece if anyone has one that they can bring to T fest then this will be very much appreciated. OR PM me here
still chipping away at the jobs
thanks G
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
