Is there any numbers on the XU-1 Booster that will tell u a build date for the booster
XU-1 Brake Booster Dates
Started by
xu2308
, Feb 09 2012 11:25 AM
76 replies to this topic
#1
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 11:25 AM
#2
Kockum
-
- Members
-
- 476 posts
Forum Fan
- Location:Southern NSW
- Joined: 27-September 07
Posted 09 February 2012 - 11:59 AM
Yes . All LJ XU1 use a VH 324 booster .
This number and the date code are stamped in the same line on the top edge of the booster above the MADE IN AUSTRALIA stamping .
For example - VH324.10.G3
This number and the date code are stamped in the same line on the top edge of the booster above the MADE IN AUSTRALIA stamping .
For example - VH324.10.G3
#3
Kockum
-
- Members
-
- 476 posts
Forum Fan
- Location:Southern NSW
- Joined: 27-September 07
Posted 09 February 2012 - 01:22 PM
#4
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 01:43 PM
ok the one im looking at has PBR on, and the made in australia, can not find a date on it, there a number on the back 1295n
there a 316 on the rim part but away from the made in australia part and to the left of the made in austalia there 616 then there a 10mm space and there a M5 thats all i can see on it
on the rear where there a rear rubber boot it says VH2011
And on the front looking seal thingy it says VH2015
Looks like there was a small plate that was on there, but not there now
there a 316 on the rim part but away from the made in australia part and to the left of the made in austalia there 616 then there a 10mm space and there a M5 thats all i can see on it
on the rear where there a rear rubber boot it says VH2011
And on the front looking seal thingy it says VH2015
Looks like there was a small plate that was on there, but not there now
#5
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 01:45 PM
The car runs V8 LX Discs and V8 LX Calipers im wondering could the booster be a LH booster that looks like a XU-1 PBR Booster ?????????
#6
dattoman
-
- Administrators
-
- 16,471 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 09 February 2012 - 01:47 PM
Take a pic of that same area
Looks like you have most of the number there though
VH316 is a fat Torana booster too
Its not LH
They don't fit
Looks like you have most of the number there though
VH316 is a fat Torana booster too
Its not LH
They don't fit
#7
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 01:52 PM
pic of which area dattoman u need to see ??????
might of had a plate as well over the top of the 316, but not there now as well
might of had a plate as well over the top of the 316, but not there now as well
#9
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 02:10 PM
Does these pics help
#10
dattoman
-
- Administrators
-
- 16,471 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 09 February 2012 - 02:10 PM
The same area in the pic above... where the 316 is stamped
There is a bottom... we just need to get to it
There is a bottom... we just need to get to it
#11
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 02:11 PM
sanded down near the numbers
#12
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 02:16 PM
u mean where near the 316 is stamped ?????
#13
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 02:19 PM
to me it looks like there no build date on it, i sold the original LJ XU-1 Brake Calipers and XU-1 Discs and replaced them with LX V8 Disc and Calipers for betting stopping power, should of kept the original XU1 discs and calipers off it
#14
_Mike73_
_Mike73_
-
- Guests
Posted 09 February 2012 - 02:32 PM
Hello,
The HK - T boosters had a ss plate on them at the front bottom face, the LC could well have been the same, as both at one period had the same short input shaft.
I have looked iinto the dates a bit and they seem to be in date batches to match the batches of XU-1's that were produced.
By the time the LJ XU-1 was produced I think there was a deviation from the same boosters as the HG as those then had the long input shaft.
As far as I can tell from the example I have all the last batch 1973 Boosters would be 10 G 3 or somewhere close to this date, any changes to this?
Looking at the booster pictured it would seem to confirm this theory, as it is a date match, is it from a Aug or September 73 XU-1 also?
Mike
The HK - T boosters had a ss plate on them at the front bottom face, the LC could well have been the same, as both at one period had the same short input shaft.
I have looked iinto the dates a bit and they seem to be in date batches to match the batches of XU-1's that were produced.
By the time the LJ XU-1 was produced I think there was a deviation from the same boosters as the HG as those then had the long input shaft.
As far as I can tell from the example I have all the last batch 1973 Boosters would be 10 G 3 or somewhere close to this date, any changes to this?
Looking at the booster pictured it would seem to confirm this theory, as it is a date match, is it from a Aug or September 73 XU-1 also?
Mike
#15
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 03:42 PM
There no 10 G 3 number on them pics or the Booster than i can see Mike, its off a 5/1972 LJ GTR Torana that has XU-1 Stuff on it, XU1 Front end, XU-1 Tank etc etc, i am going to suss the date codes out on the items, is the XU-1 Front x member dated ??????????
#16
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 09 February 2012 - 04:17 PM
Hi Al,
They weren't dated at all on the K frame,only the brake callipers were,my booster on mine is 31 G 2.
Cheers John.
They weren't dated at all on the K frame,only the brake callipers were,my booster on mine is 31 G 2.
Cheers John.
#17
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 04:21 PM
oops sold my calipers, i hope i have the guys old number i sold them to, still cant see the date number on this brake booster
#18
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 04:25 PM
sorry mike u are reading the first posted pic above my pics
#19
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 09 February 2012 - 04:31 PM
Maybe the front of the front cover of the booster was changed some time in its life.
#20
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 04:34 PM
yeah frash that might be whats going on with it, seems strange no date code
#21
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 09 February 2012 - 04:44 PM
A lot of them that i have seen over the years,rust around the the centre,from leaking master cylinders,and lack of maintenance.
Chhers John.
Chhers John.
#22
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 04:45 PM
is the XU-1 Fuel Tank dated, never ever seen any numbers on one ?????
#23
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 09 February 2012 - 04:48 PM
No Numbers al
#24
xu2308
-
- Members
-
- 4,704 posts
Grail Hunter
- Name:AL
- Location:Belconnen ACT
- Car:SMP LJ GTR V8 Prototype-Confirmed By HHS and Ex GMH XW7 Engineers
- Joined: 09-April 09
Posted 09 February 2012 - 04:50 PM
ok thanks for that, not much luck with my date searching as such
#25
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 09 February 2012 - 04:50 PM
Your welcome Al.
John.
John.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
